Loop Process Calibrator Multimeter Similar to FLUKE 707 - YH7008

Loop Process Calibrator Similar to FLUKE 717:

• One-handed tool for current loop calibration, repair, maintenance
• Environment-friendly high-capacity rechargeable lithium battery, long standby
• Large display,simple & quick-click interface
• Simultaneous mA

• mA accuracy of 0.025%
• 1 µA resolution for mA source, simulate and measure
• Push button 25% steps for fast, easy linearity checks
• 0-100% “span check” for fast confirmation of zero and span
• Selectable slow,fast ramp and step ramp to provide smooth outputs for valve slewing and loop tests
• 24 volt internal loop supply,power and read a transmitter without carrying a DMM
• Measures DCV: 28 V
• Power: Single 9V rechargeable battery

• 0 - 20 mA or 4 - 20 mA default start up modes
• Innovative output adjustment dial with 1 µA resolution
• HART ™ mode connects 250 Ω resistor with 24 V loop for compatibility with HART communicators
• Operating Temperature: -10ºC ~ 55ºC
• Storage Temperature : -30ºC ~ 60ºC
• Humidity : 0 to 90% (0ºC~35ºC); 0 ~70% (35ºC~55ºC)
• Temperature Coefficient : -10ºC~18ºC, 28ºC ~55ºC, ±.005% of per ºC
• Dimension: 190* 89* 42mm
• Weight: 350g

Function Description:

1. Measurement Function :

DCV Measuring:

Range: 0 ~ 28V

Resolution: 1mV (mV)

Accuracy: ± (0.02% of the rdg +4 lsb)

Input impedance: 1MΩ

DCA Measuring:

Range: 0 ~24mA (24mA in maximum)

Resolution: 1uA

Accuracy: ± (0.02% of the rdg +4 lsb)

2. Sources / Simulate mA dc:

Range: 0 ~24mA

Resolution: 1uA

Accuracy: ± (0.02% of the rdg +4 lsb)

3. Loop Power: 24V

OR

Factory Tour

Accessories:

Test leads, Test plug wire clip, Charger, Battery 9V, User Manual.

Warranty: one year