Applications:A dry& wet dispersion instrument
High measurement accuracy
No dispersant is needed
Port: Zhuhai
Minimum Order Quantity: 1 Set/Sets n/a
Supply Ability: 150 Set/Sets per Month n/a
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: seaworthy packing
Delivery Detail: 1 month after order confirmation
Laser Particle Size Analyzer
Model:LS-C(III)
Applications:LS-C series use compressed air to disperse powder sample, they are specially designed for the measurement of samples that cannot be dispersed in liquid. The dry dispersion sample feeder of LS-C(III) can also attached a wet dispersion sample feeder,so the LS-C(III) is considered as a dry& wet dispersion instrument.
Features:
1.Dry dispersion avoids the physical and chemical change of samples.
2.MultNo dispersant is needed, economical and environment friendly.
3.High measurement accuracy.
4.S-C(III) is of changeable dry & wet dispersion sample feeders, and of compact design.
5.Whole range measurement without changing the lens.
6.Parameters are also suitable for cement industry, such as SSA,R-index, fineness, percentage over a certain size.
Laser Particle Size Analyzers Selection Guide
Models | Applications | Dispersant | Measuring Range | Features |
Easysizer20 | Powders, suspensions | Liquid | 0.1~500μm | Fully automatic, most minimized the operator factors, with very easy operation. |
LS-pop(6) | Powders, suspensions | Liquid | 0.2~500μm | Basic cost effective instrument with well developed technology |
LS-pop(8A) | Powders, suspensions | Liquid | 0.2~500μm | Basic cost effective instrument with well developed technology |
LS608 | Powders, suspensions | Liquid | 0.1~500μm | With the same measuring range as Easysizer20 |
LS908 | Powders, suspensions | Liquid | 0.05~500μm | The only effective instrument with lower limit of submicron made in China(D50<1μm) |
LS-CWM(3) | Powders, suspensions | Liquid | 0.5~1500μm | Measurement of coarse(D50>100μm) and wide distribution samples, suitable for coal slurry etc. |
LS-C(III) | Powders, suspensions | Liquid, Air | 0.1~1000μm | Measurement of samples that cannot be dispersed in liquid; wet dispersion is optional for this model. |
DP-02P | Fog drops | 1.0~1500μm | For the measurement of fog drops | |
RC-3000 | Powers Suspensions | 1.0~256μm | Suitable for high resolution samples, such as copy powder, micro-abrasives; Or for liquids with few particles such as particles in river water. | |
RC-2100 | Powers Suspensions | 1.0~256μm | ||
PIP9.1 | Powers Suspensions | 0.5~3000μm | Observe the particle images besides of particle size distributions, a good assistant instrument for particle size analysis. |
LS-POP6 EASYSIZER20