LCD network cable tester - SML-WD68

LCD network cable tester, 1.scan and find the wanted cable;, 2.judge various error such "open,short" in cable., 3.measure lengt - more info check here: http://www.buymeasuringtools.com/LCD-network-cable-tester-10152451/

Quick Brief

Place of Origin: Guangdong China (Mainland) Brand Name: Shomlin Model Number: SML-WD68 Power: Electronic Usage: cable tester color: black

Specifications and Product Details:

LCD network cable tester SML-WD68

warning

1).The cable tester works with 4 battery of 1.5V.

2).The cable tester will automatically shut off if not work for 15 minutes.

3).It prompts “low battery” and can’t work normally while the battery voltage is low. This series of cable tester is designed for testing various cables including RJ45 network cable, RJ11 telephone line, and BNC coaxial cable, and even can test common wire line by alligator clip with a RJ11 port, but can’t be used to test other charging cables working with power, a misuse will lead to permanent damage for it.

Product includes

√mainframe

√long-distance testing meter

√cable-scanning sensor

√cloth tool bag

√alligator clip adapter

√four piece of AA battery of 1.5V

Technical Specification

Dimension
Display screen	Lattice:128x64(valid screen 48x32mm)
Power supply	4 piece of AA battery of 1.5V
Testing port	in mainframe:RJ45 “M”main port,RJ45“S”return port, RJ11“M”port,BNC“M”male port; in receiver: RJ45“R”distance port,RJ11“R” distance port
Working environment temperature	-10°C------+60°C.
Time-delaying & shut off automatically	The tester will shut off automatically to save battery if not work for 5 minutes
To scan and find the wanted cable	Cable-scanning sensor is with a high sensitivity and strong anti-jamming ability,which make the tester to recognise the wish cable in numerous cables by adjusting the switch and volume, and even it can works while the cable is connected with the working switchboard, the hunting length may amount to 3000 meters.
To check connection status	It provide two ways of M-S and M-R for you to select and test the circuit status of open/short/crosstalk/ Reverse/match, and judge the break point along cable, the result information shows in LCD.
To judge opening point	It can help to focus on the exact point if there is a open circuit among the crystal port of network cable.
To judge connect-and-break situation	It can judge the connection status ok or not while the cable is connected with the router, even you can test the telephone line while it works with electricity.
To check crosstalk situation	To check and judge the crosstalk situation in network cable, and help to resolve the latent network issue of slow speed.
To measure the cable length	M-S, M-R, or Open 3 ways are provided to measure the length of cables up to 1,200 meter. The accuracy of measuring length for the break point is about 98%.