LCD lan cable test checker
1.to check various cable status
2.to measure the length
Port: Shenzhen China
Minimum Order Quantity: 10 Set/Sets
Supply Ability: 8000 Set/Sets per Week
Payment Terms: T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: plastic, cloth bag,color box,carton packaged step by step
Delivery Detail: in 1-3 working days
LCD network cable tester SML-8838
warning
1).The tester works with a 9V battery,press button ON/OFF for 3 seconds to power on.
2).The tester will automatically shut off if stop operating for 15 minutes
3). it prompts a “low battery” and can’t work normally if a battery power is low
4).The tester is for Utp 5E/6E cable(RJ45), telephone line(RJ11),USB line and coaxial cable
(BNC)
5).The tester support to test when RJ45 working voltage is 5V, RJ11 working voltage is 45V.
High voltage in cable will damage the tester.
Technical Specification
see it in operation manual.
Basic test method
1.M-S method: A local method to map and measure the length of cable only for RJ45 cable
2.M-R method: A remote method to map and measure the length of cable for RJ45,RJ11,USB,
BNC cable.
3.Open method: a remote method to measure the length of RJ45 cable.
Main functions:
1. to check various circuit status in cable, wth M-S, M-R methods to check error such as open,
short circuit, jumper, reverse, crossover,matching connections and cable break point ,the
result visually displays on the LCD.
2.to check the crosstalk error in end port of twisted-pair cable which is the cause of slow
network speed.
3.to judge the open point in crystal port of cable,can help to accurately detect the exact open
point in the cable end (left, right or middle).
4.to check the connection status of cable and judge the break point in cable.
5.to measure the length of various cable, With M-S, M-R, OPEN methods to measure the cable
length up to 1,200 meters,the accuracy of the measurement of length and location of cable
break point is up to 98%.
Features
1. Automatic power off if time-delay.
2. The power led will flash to prompt a low level if battery fail to
support.
3. Can self-test and self-adjust various test status, and a self-acting
to replenish for battery capacity and ambient temperature.
working current: emitter≤20mA,
Power requirement: DC, 9V superposition battery
Used for:
1. RJ45 network cable,RJ11 telephone line, BNC coaxial cable,USB line.
2. It can test or scan other type of cable via alligator adapter.