KWP (Portal) Microcomputer Control Electronic Universal Testing Machine - KWP

KWP (Portal) Microcomputer Control Electronic Omnipotence Testing Equipment

This portal microprocessor control electric universal testing machine is an electronic technique and mechanical drive combinative machine for new materials testing. It has a broad accurate loading speed and force measurement range, is of high accuracy and sensitivity to load,deformation,displacement measurement and control, and can proceed constant speed loading,constant speed deformation,constant speed displacement automatic control test, and have the functions of low cycle loading circulation,deformation circulation,displacement cycle.

Mainly used in the sample tensile,compression,bending,cutting test, and some of the special material test method.

Main technical parameters:

1. Maximum testing force of measurement parameter: 10KN, 50KN, 100Kn, 300KN (optional);

2. Testing machine level: 0.5 level / 1 level;

3. Testing force range 0.4% ~ 100% FS/0.2% ~ 100% FS ;

4. Testing force's relative error of showe value ± 0.5% / ± 1.0% or less;

5. Testing force resolution 1/300000FS;

6. Deformation measuring range: 0.02% ~ 100% FS;

7. Deformation relative error of show value: within ± 0.50%;

8. Deformation resolution: 1/300000FS;

9. Max deformation measuring range: 10 ~ 800mm;

10. Max deformation relative error of show value: within ± 0.50%;

11. Max deformation resolution: 0.008mm;

12. Beam displacement relative error of show value: within ± 0.50%;

13. Displacement resolution 0.05μm;

14. Control parameters velocity range: 0.005 ~ 5% FS / S;

15. Velocity accuracy <0.05% FS, within the for the set value of ±2%:

16. Rate≥ 0.05% FS, within the set value of ± 0.5% / ± 1%;

17. Range of deformation rate: 0.02 ~ 5% FS / S;

18. Relative error of deformation rate: within set value of ± 0.5%;

19. Beam velocity range: 0.001 ~ 500mm/min;

20. Relative error of beam velocity rate <0.01 mm / min, within the set value of± 1.0%;

21. Rate ≥ 0.01 mm / min , within the set value of ± 0.2%;

22. Range of constant force, constant deformation, constant displacement control: 0.5% ~ 100% FS;

23. Constant force, constant deformation, constant precision displacement control settings ≥ 10% FS, within the set value of ± 0.1%;

24. Set value <10% FS, within the set value of ± 1%;

25. Other effective testing width: 560mm;

26. Max beam stroke: 1200mm;

27. Power supply 380V ± 10%; 1.3kW; host weight: 1500kg;

Main Configuration:

1.Testing mainframe;

2. Testing software;

3. Experimental work-holding (customized according to users' requirements);

4. Computer and printer (user-owned, beyond the scope of quotation).