Product Features:

Vortex Flowmeters

Simple Structure

Long Service Life

Wide Application

Business Terms:

Port: Shanghai

Minimum Order Quantity: 1 Set/Sets

Supply Ability: 5 Set/Sets per Week

Payment Terms: T/T

Contact Supplier

Specifications and Product Details:

KTLU Vortex Flowmeters, produced by Shanghai Kent and have gained CE certificate, can be widely used to measure volumetric flow of overheated & saturated steam, compressed air & general gas, water and fluid etc.

Technical Features:

No moving parts, high reliability and durability
Convenient installation and maintenance
Sensor not connect with the measured fluids directly, stable performance and long service life
Output pulse signal is directly proportional to flowrate, high accuracy and no zero drift
Wide measuring range, turndown ratio 10:1
Low pressure loss, low cost
Frequency output not affected by the fluid change in physical character and composition, meter factor (K) only considers shape and dimension of eddies. Measurement of volumetric flow can get compensation once it needs. Then no re-calibration meter factor needed if damaged parts be exchanged
Wide application for steam, gas, liquid

Technical Specifications:

Size: DN15 ~ DN500
Medium: Liquid / Steam / Gas
Accuracy: Pipe Type: ±1.5% (gas, steam), ±1.0% (liquid); Inserted Type: ±2.5% (liquid), ±3.0% (gas)
Repeatability: Pipe Type: 0.5% (gas, steam), 0.33% (liquid); Inserted Type: 0.83% (liquid), 1.00% (gas)
Rated Pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa
Signal Output: Pulse Output, Two Wire 4~20mADC, RS-485, Hart, Modbus
Power Supply: 24V DC / 3.6V Lithium Battery / Double Power Supply (24V DC, 3.6V Lithium Battery)
Installation type: Wafer Type / Fixed Inserted / Adjustable Inserted / Adjustable Inserted (with ball valve)
Protection Grade: IP65
Explosion Proof: Exd II BT4 / Ex ia IIC T4
Fluid temperature: -40 ~ +250^oC (-40 ~ +120^oC for insterted), +100 ~ +350^oC (high temperature)