KJ-2091 humidity temperature indicator
1.Manufacturer
2.Reasonable price
3.2-year after-sale service
4.Use,humidity chamber
Port: shenzhen
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 200 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: packaging in wooden cases,the size is seen in the product description.
Delivery Detail: in 1 week
KJ-2091 humidity temperature indicator
Design Standard: GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
Uses:
This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, LED,resist dry,resist humidity and resist cold. That can define performance of material.
KJ-2091 humidity temperature indicator
Character:
Model | KJ-2091 | ||||
Inner size W×H×D(cm) | 40×50×40 | ||||
Outside size W×H×D(cm) | 93×155×95 | ||||
Inner chamber volume(V) | 80L | ||||
Temperature and humidity Controll range | -40°C~150°C RH20%-98% | ||||
Function | Temperature and humidty fluctuation | ±0.5°C;±2.5%RH | |||
Temperature and humidity deviation | ±0.5°C-±2°C;±3%RH(>75%RH); ±5%RH(≤75%RH) | ||||
Controller resolution | ±0.3°C;±2.5%RH | ||||
Controller brand | Korea TEMI880 | ||||
Heating Time (RT-HT)°C/min | 100 | 150 | |||
40 | 50 | ||||
Cooling Time (RT-LT)°C/min | -20 | -40 | -60 | -70 | |
40 | 50 | 55 | 80 | ||
Power supply KW | 4.0 | 6.0 | 6.0 | 6.0 | |
Material | Inner material | SUS 304# steel plate | |||
Outside material | SUS 304# steel plate(surface disposing) | ||||
Thermal insulation material | Thermostability high density chlorine formic acid foam insulator material | ||||
System wind pathround-robin mode | centrifugal fan-broadband enforce circulation | ||||
Refrigeration way | Single stage compression refrigeration | ||||
Refrigerator | whole sealing piston France Taikang brand Compressor | ||||
Freezing fluid | R4O4A or USA Dupont environmental protection refrigerant(R23+R404) | ||||
Condensation way | forced air cooling or water-cooling | ||||
Heater | Nichrome heating wire heating | ||||
Humidifier | Semi-enclosed steam humidification | ||||
Water-provide way | full-automatic periodical feeding | ||||
Standard configuration | 1 Observe window(double-deck cavity toughened glass),1 50mm test hole in the left,1 PL inner chamber lamp,2clapboards, 1 bag of wet and dry bulb,3 fuses, 1 power line. | ||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage,over-humidity and temperature protection,Protection switch,fuse stoppage warning system | ||||
Power | 1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |