1.Temperature controller
2.Temperature display
3.Illumination control
4.Parameter sets and value storing
Minimum Order Quantity: 500 Unit/Units
Supply Ability: 99999 Unit/Units per Month
Payment Terms: T/T
Contact Supplier
temperature controller
·Temperature display
·Temperature control
·Illumination control
·Parameter sets and value storing
·Heater re-start delay
·Parameter locking
·The factory default resumption
·Offset on sensor temperature
·Self testing
·Power supply: 12V~, 50/60Hz
·Power consumption: 5W
·Range of Temperature displayed: -10~120
·Accuracy: ±1
·Range of set temperature: -10~120
·Temperature sensor: NTC, one sensor.
·Output contact capacity for heater: N. O. 7A/250V~, 50/60Hz.
·Output contact capacity for illumination: N. O. 5A/250V~, 50/60Hz.
·Mail controller panel dimension: 78(L)×35(W)×76(D)mm.
·Mail controller mounting dimension: 71(L)×29(W)mm.
Parameter | Function | Set range | Default |
PA | Menu password | 00 ~ 99 | 00 |
E1 | Lower set point limit | -10 ~ Set temperature | 00 |
E2 | Higher set point limit | Set temperature ~ 120 | 80 |
E3 | Temperature hysteresis | 01 ~ 30 | 05 |
E4 | Heater start delay time | 00 ~ 10 | 00 |
E5 | Offset on room temp. | -05 ~ 05 | 00 |
CPA | Changing menu password | 00 ~ 99Setting00, the menu password is cancelled | 00 |
Notes:
·The parameter can be changed only after the correct PA to be entered, or it can only be checked, except temperature controlling.
·It means locking cancelled if PA is set 00, no password required for checking and/or changing.