1.Temperature display (Celsius/Fahrenheit degrees)
2.Temperature control
3.Illumination control
4.Electric heater control
Minimum Order Quantity: 500 Unit/Units
Supply Ability: 99999 Unit/Units per Month
Payment Terms: D/P
Contact Supplier
temperature controller
·Temperature display (Celsius/Fahrenheit degrees)
·Temperature control
·Illumination control
·Electric heater control (Glass door defog)
·Manual, automatic defrost by turning off
·Time or temperature setting to end defrost
·The cold-room sensor temperature can lock during defrost
·Parameter sets and value storing
·Compressor re-start delay
·Parameter locking
·The factory default resumption
·Offset on sensor temperature ·Self testing
·Power supply220V/AC~240V/AC50/60Hz 110V/AC~120V/AC60Hz
·Power consumpotio n5W
·Output relay for compressorN.O.30A/250V~50/60Hz;
·Output relay for lighitingN.O.5A/250V~50/60Hz;
·Output relay for brume clearingN.O.10A/250V~50/60Hz;
·Temp. sensorNTC,2sensorTemp. Display , defrost control
·Temp unit/Change ·Resolution1 ·Accuracy±1±2
·Range of temperature control-45 ~ 45-40 ~ 120
·Panel dimension78×35×76mm
·Mounting hole dimension71×29mm
| Parameter | Function | Set range | Default |
| PA | Menu password | 00 ~ 99 | 00 |
E1 | Lower set point limit | -45 ~ Set temperature | -15 |
| -40 ~ Set temperature | 05 | ||
E2 | Higher set point limit | Set temperature ~ 45 | 10 |
| Set temperature ~ 120 | 50 | ||
E3 | Temperature hysteresis | 01 ~ 10 | 05 |
| 01 ~ 36 | 07 | ||
| E4 | Comp. Start delay time | 00 ~ 10Min | 00 |
| E5 | Offset on room temp. | -05 ~ 05/ | 00 |
| E6 | Offset on evep. temp. | -05 ~ 05/ | 00 |
| F1 | Max. Defrost duration | 01 ~ 60 Min | 20 |
| F2 | Defrost interval time | 00 ~ 24Hr | 06 |
F3 | Defrost termination temp. | 00 ~ 45 | 12 |
| 32 ~ 110 | 54 | ||
F4 | Display during defrost | 00=Normal display | 01 |
| 01=Last value before defrost | |||
C1 | Temperature unit | 00= | 00 |
| 01= | |||
| CPA | Changing menu password | 00 99Setting00, the menu password is cancelled | 00 |
Notes:
·The parameter can be changed only after the correct PA to be entered, or it can only be checked, except temperature controlling.
·It means locking cancelled if PA is set 00, no password required for checking and/or changing.
Model No.: GS828-WM
Features: GS828-WM reads data logger, and uploads by GSMS or GPRS.
It interfaces with modbus water meter via RS485 port.
Model No.: TMT85
Features: 1)2 input channels
2)Galvanic isolation
3)Optional installation in field housings
4)High accuracy by sensor-transmitter mat
Model No.: A18
Features: PID tempeature controller
economic and stable performance
fuzzy control
easy operating,auto-tuning
Unversial Input;CE
Model No.: A18
Features: 1.easy operating,auto-tuning
2.economic temperature controller
3.stable performance
4.fuzzy control
5.PID control
Model No.: XMT7100
Features: >Outline Dimension:48*24*78mm
>PID auto-tuning
>economic temperature controller
>sensor shift free
>stable performance
Model No.: T360-TT-NIST
Features: 45302-0201-TT-NIST (Extech) High-Temperature Infrared Thermal Imaging Camera with Thermatrak software installed & NIST certified
Model No.: T360-NIST
Features: 45305-0201-NlST (Extech) High-Temperature Infrared Thermal Imaging Camera with NIST Calibration
Model No.: B200-TT
Features: 45608-0201-TT (Extech) High-Sensitivity Infrared Thermal Imaging Camera with Thermatrak software installed
Model No.: B360-TT-NIST
Features: (Extech) High-Sensitivity Infrared Thermal Imaging Camera with Thermatrak software installed & NIST certified
Model No.: T300-NIST
Features: 45305-0201-NlST (Extech) High-Temperature Infrared Thermal Imaging Camera with NIST Calibration
Model No.: T300-TT-NIST
Features: High-Temperature Infrared Thermal Imaging Camera with Thermatrak software installed & NIST certified
Model No.: T400-TT
Features: 45301-0202-TT (Extech) High-Temperature Infrared Thermal Imaging Camera with Thermatrak software installed