Product Features:

Water Treatment Flowmeter

High Intelligentized

Multi-electrode Structure

Serial Communication Bus

Business Terms:

Port: shanghai

Minimum Order Quantity: 1 Set/Sets

Supply Ability: 100 Set/Sets per Week

Payment Terms: T/T

Contact Supplier

Integrated type electromagnetic flowmeter

Specifications and Product Details:

Water Treatment Flowmeter can be widely used to measure the volumetric flow rate of the conductive fluid and slurry in the enclosed pipe such as water, sewage, kinds of acid & salt liquor, slurry, ore slurry, pulp and so on.

Technical Features:

Not affected by the change of the fluid condition such as density, viscosity, temperature, pressure and conductivity, and the signal output of inductive voltage is linear to average velocity, therefore it has a high accuracy of measurement.
No obstacle parts in the meter tube so that no extra pressure loss; no movable parts, so meter has long service life.
Short straight pipe required, only 5D for upstream and 3D for downstream due to inductive voltage signal which is the average value in the cross-section of the pipe.
Only liner and electrode contact to the fluids, choose proper material of liner and electrode to prevent it from corrosion to ensure meter long operation life.
MCU and SMT technology used in converter to make it has high performance, high accuracy, low power consumption, stable zero point, easy parameter setting, dot-matrix display for total and instantaneous flowrate, velocity and percentage of flowrate.
Two-direction measurement for forward and reverse.

Technical Specifications:

Size: DN 15 ~ DN 3200
Medium: Conductive liquid, slurry
Medium Temperature: ≤160^oC
Conductivity: ≥ 5 μS/cm
Accuracy: ±0.3%, ±0.5%
Repeatability: ±0.1%, ±0.15%, ±0.25%
Rated Pressure: 0.25, 0.6, 1.0, 1.6, 4.0MPa (or specified by customer)
Display: Instantaneous flowrate, total flow, velocity, flowrate percentage with back light
Signal Output: Analog 4 ~ 20mA, isolated, load resistor ≤750Ω; Pulse frequency 0 ~ 1kHz, OCT, external power∠35V DC, 250mA/max
Power Supply: Single-phase 85 ~ 265V AC, 45 ~ 63Hz, power∠20W; 24V DC, 10VA
Converter Type: Compact, remote
Protection Grade: IP65/ IP67/ IP68
Explosion Proof: Exd II BT4/ Exib II CT4
Velocity: 0.3 ~ 12m/s( 0.1 ~ 15m/s as required)
Liner: Chloroprene Gum (DN25 ~ DN3400)/ Polyurethane(DN25 ~ DN500)/ F4 ( DN25 ~ DN1200)/ F46(FEP)(DN25~DN200) /F40(DN25 ~ DN2800) /PO(DN50 ~ DN2800)/ PPS( DN50 ~ DN2800)
Flowing Direction: Forward, Reverse
Electrode Material: 316L, Pt, Ta, Ti, HB, HC
Electrode Type: Standard, blade, removable
Electrode Number: 2 ~ 6 pcs
Flange Material: SS/ CS
Alarm (N. O.): Empty, excitation, high/ low flowrate limit
Ambient: Temperature: -25 ~ +60^oC, Humidity: 5 ~ 90%
Communication: RS-485/ Hart/ Profibus-DP