Injection Pump Detection Machine - PS2000-v

PS2000-V Injection Pump Detection Machine:

Introduction:

Test diesel mechanical pumps, such as in-line pump, rotary pump and distribution pump. RPM, count, temperature and advanced angle are displayed on computer screen.

Characteristics:

1.Main motor frequency conversion adjust speed(0~4000 r/m adjust)

2. Small value of reduction of speed, large output torque

3. High measurement accuracy

4. The function of overvoltage, overload and short circuit

5. Many kinds of rotation speed presetting

6. Constant temperature controlled

7. Ultra low noise

8. Built-in air supply

9. Advanced angle, rotation speed, count, temperature,

pressure, rack bar are displayed on 17’’LCD (optional)

10.Operating position: arbitrary side of the two work sides of the test bench

11.Built-in lube system ( optional )

12. Two display ( Screen display and digital display ), two operation system, can operate separately.

Functions:

1. Test each cylinder’s oil supply capacity at various rotation speed

2. Test each cylinder’s injection time with static state

3. Test the mechanical speeds governor

4. Test electromagnetic valve of distribution pump

5. Check pressure compensators

6. Test the sealing performance of injection pump

7. Test the oil-return quantity of distribution pump

8. Test inner pressure distributor pump

9. Checking of the pneumatic speed governor’s vacuum performance

10. Measurement of rack travel

11. Measurement of advanced angle

12. Ten kinds of rotation speeds presetting

13. Measurement of speed governor curve ( optional )

14. Test the injection angle of lube ( optional )

15.Large-scale data base, search and print easily ( optional ).

Technical parameters:

1. Rotation speed:0~4000 r/m

2. Double series of graduates:45cc,150cc

3. Volume of diesel fuel tank: 60L

4. Temperature autocontrol: 40±2°C

5. Test oil filtering unit: 5μ

6. D.C. supply:12V/24V

7. Feed pressure:low:0~0.4Mpa; high:0~4Mpa

8. Air pressure:positive :0~0.25Mpa; Negative:-0.05~0Mpa

9. Flywheel inertia: 0.8KG·M2

10. Center height:125mm

11.3 phase power resource: 380V/50Hz or 220V/60Hz

12. Output power resource: 7.5KW,11KW,15KW,18.5KW, 22KW or as request