Infrared Moisture Meter for all kinds of materials HZ-6603 - HZ-6603

Infrared Moisture Meter for all kinds of materials

features of the Infrared Moisture Meter

1, small size, light weight;

2, detection speed, accuracy;

3, simple, test accuracy;

4, showing some with red LED display;

5, uses a wide range;

6, with the computer, the printer connection.

Description of the Infrared Moisture Meter:
This Infrared Moisture Meter heating is our newly developed new rapid water testing equipment. Circular

halogen lamp to ensure that samples are uniformly heated,easy, accurate measurement.Moisture in measuring

sample weight at the same time, the instrument the ring halogen heating tube, fast drying sample during the drying

process, moisture meter measured continuously and instantly displays the sample moisture content% loss, drying

process is complete, the final determination of the watercontent value is locked display.Compared with the

International oven heating, halogen heating the sample at high temperature rapid drying evenly, easily damaged

surface of the sample, the test results with the national standard oven method has good agreement with the

irreplaceable, and much higher detection efficiencyin the oven.General determination of the sample just a few

minutes to complete.The instrument is simple, the test is accurate, some with red LED display, showing the value of

the visible display of water value, respectively, the sample initial and the final value, measured time, discrimination

time, temperature and initial value, final value and other data, and hascomputer, printer connectivity.

Suitable Industry:

the moisture meter can be widely applied to all the needs of rapid determination of moisture in fields such as

medicine, food, tobacco, chemicals, food and textiles, agriculture, forestry, fisheries, paper, rubber, plastics, textiles,

fire doors and other industries in the laboratoryand the production process.

Technical parameters:

1.sample weight ≥ 0.5 g
2.the moisture content range (%): 0.00-100.00
3.measured sample weight (g) :0.5-20
4.the maximum known weight (g): 90
5.the minimum weight reading (g): 0.001
6.the moisture content of readability (%): 0.01
7.the temperature indication range (°C): -205 at room temperature (the temperature can be adjusted,

the maximum can be changed to 250 degrees)
8.Communication Interface: Standard RS232 Interface
9.baud rate: 9600 / S bit
10.means of communication: MCS51 MCU communication 2
11.power supply: voltage 220V ± 10% Frequency 50HZ ± 1HZ
12.the sample temperature: -40 °C -50 °C
13.Operating temperature: -5 °C -50 °C
14.relative humidity: ≤ 80% RH
15.Dimension (mm): 380 × 205 × 325
16. Net weight: 3.7kg