Industrial Scale PCE-MB 200 PCE-MB 200

Specifications and Product Details:

Moisture - Dryness Content 0 ... 100 % / resolution 0.01 % /Weighing range of 0 ... 200 / resolution 0.001 g /bargraph display / RS-232-interface and optional software

The Industrial Scale is a precision device for the determination of moisture content in small samples of materials by drying the sample with halogen heaters. The Industrial Scale is in use as a moisture measurement tool as well as for determination of dryness content. Also it can work as a standard mg-balance. The Industrial Scale uses heaters (2 x 200 Watts) to dry the sample in conjunction with a precision balance to measure the minute changes in weight as the sample dries. In general these units can be used in research, development and quality control. The materials to be tested are: food, sugar, salt, granulates, plastics, pellets, fibers, ..., but also liquids as sludge and mixtures of all kinds. So the industrial scale is a multi purpose tool.
The software built into the system provides many different drying programmes and calculates various parameters for humidity and dry mass. A typical drying procedure involves choosing a drying temperature, a time interval - for example 100 degrees for 10 minutes- and a mode - % solids. Automatic external calibration using either 100 g or 200 g calibration weight (depending on the model) guarantees ongoing accurate results. The integrated RS - 232 - interface enables you (with optional software-kit) to automatically send the moisture data into a sequence table.

Technical Specification
Measurement Weighing range		0 ... 100 % Absolute Moisture
		0 ... 200 g
Maximum capacity		200 g
Readability		0,01 % 0,001 g
Linearity		± 0,1 g / OIML clase II
Repeatability		0.0015 g
Tare range		Full
Heating		2 quartz halogen heaters (200 W each)
Temperature range		+50 °C ... +160 °C in increments of 1 °C
Stabilisation time		3 ... 5 s
Time setting / Sampling interval		2 min ... 9 h 59 min (in increments of 1 s)
Memory / Drying curve		160 (to memorize user programmable drying curves)
Work mode / Drying sequence		- Automatic (drying to constant weight) - Semi-automatic (drying stops when loss per unit of time goes below theoretical value) - Manual (by preset time)
Interface		RS-232 bi-directional interface
Display		Backlit with dual digits 34 mm (multilingual) and capacity tracker
Calibration		Automatic external calibration with optional weights (100 / 200 g)
Pan size		Diameter 100 mm
Operating Temperature		+18 ... +30 °C
Power supply		240 V / 50 Hz
Housing		die cast aluminium
Protection		IP54
Overall dimensions		235 x 245 x 260 mm
Net weight		ca. 8 kg
Delivery contents 1 x Industrial Scale PCE-MB 200, 1 x mains plug, 10 x aluminium sample pans, user manual (in needed language: English, Russian, Italian, French, Spanish ...)