Immersion thermocouple
Type:
1.Round sampler
2.Oval sampler
3.Dual thickness sampler
Port: Tianjin Port
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Packed in carton,50Piece/Carton.
Delivery Detail: 30 days after receiving the deposit
Immersion thermocouple
1. General introduction :
During the process of smelting, in order to master the changing of the liquid steel composition, sampling must be taken to get process analysis. During the pouring process, end production samples often are taken to get end production analysis. The progress of science and technology is pushing the progress of detection techniques. So studying fast process analysis methods and shortening sample taking time are the channels to raise analysis techniques and reinforce quality control.
2. Application range:
The sampler is suitable for every steel factory to sample in tundish, ladle and horizontal casting.
3. Principle:
When the sample instrument is put into the liquid steel, according to the floating continuous equation and static pressure effect of molten steel, the liquid steel will flow into the sample room by itself through the instrument taking the sample. The liquid steel in the sample room can be analyzed quickly and get C, Mn, P, S etc.
4. Main technical parameter:
5. Using Method:
6. Sample size- sample in cup(mm) :
Oval 32×36×12
Oval 32×43×8
Oval 32×43×12
32×60×12/4
34×55×4/12