Product Features:
IEC60335-1 clause 25.15
Business Terms:
Port: Guangzhou
Minimum Order Quantity: 1 Piece/Pieces negotiable
Supply Ability: 2 Piece/Pieces per Month negotiable
Payment Terms: T/T,cash
Contact Supplier
IEC60335-1 clause 25.15
Port: Guangzhou
Minimum Order Quantity: 1 Piece/Pieces negotiable
Supply Ability: 2 Piece/Pieces per Month negotiable
Payment Terms: T/T,cash
Contact Supplier
Packaging Detail: wooden case
Delivery Detail: 3-30days
Power Cord Strain and Twist Tester
Product details:Model ZLT-LN1. Appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.
A mark is made on the cord while it is subjected to the pull force shown in follow table, at a distance of approximately 20 mm from the cord anchorage or other suitable point.
The cord is then pulled, without jerking, for 1 s in the most unfavourable direction with the force specified. The test is carried out 25 times.
The cord, unless on an automatic cord reel, is then subjected to a torque that is applied as close as possible to the appliance. The torque is specified in following table and is applied for 1 min.
Table – Pull force and torque
| Mass of appliance Kg | Pull force N | Torque Nm |
| less than 1 | 30 | 0,1 |
| more than1 and less than4 | 60 | 0,25 |
| more than 4 | 100 | 0,35 |
During the tests, the cord shall not be damaged and shall show no appreciable strain at the terminals. The pull force is reapplied and the cord shall not be longitudinally displaced by more than 2 mm.
| Power Supply | 220V 50Hz or 115V 60Hz |
| Pull weight | 10N*1,60N*1 and 20N*2 |
| Torque weight | 2N*1,5N*1,7N*1(0.1Nm,0.25Nm,0.35Nm) |
| Tension times | 0~9999(selectable) |
| Tension frequency | 1 times/s |
| Torque time | 0.1S~999S(selectable) |
| Conforms To | IEC60335-1 clause 25.15 |
Model No.: JQ-818
Features: tumbling barrel tester
Model No.: HZ-3019B
Features: 1.constant temperature tank
2.operation convenience
3.high accurate and quality
4.lowest price
5.warranty 3 years
Model No.: JQ-6240
Features: LCD push deformation tester
Model No.: JQ-6300
Features: Slip-shell tester
1.Easy to operate
2.High quality
3.Low price
4.Good after service
Model No.: YYQ-1000A
Features: Roller Dynamic Balancing
industrial control computer
Windows-based system
Model No.: HZ-7015
Features: 1.Open mixing mill
2. Speed:960r/min
3.Front roll speed:9.8m/min
4.Roller speed ratio:1:1.22
5.Simply roll diameter:160mm
Model No.: Intelligent 2230 / 2600 Series
Features: We are the only company in the world to offer entire range of Liquid Chromatography products
Model No.:
Features: Focus Techonology (Particles Characterization)
Model No.: JZHY-180
Features: DuNouy Tensiometer
manual operation
value of the tension showed on dial
good quality and proper price
range:0-180mN/m
Model No.:
Features: Material Science Instruments
Model No.:
Features: Biotechnology Laboratory Equipments
Model No.: JQ-6230
Features: LCD & Touching Screen tester is testing rolling, clicking, marking/crossed test on LCD & displayer