Hot sale Tiny Temperature Transmitter Module MS182 - MS182

MS182 Head Temperature Transmitter

• Universal settings with HART® -protocol
• Operation, visualisation and maintenance via PC
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit
• Ex-Certification
• Galvanic isolation
• Analog or digital output
• Customer specific measurement range setting

Primary Technical Characteristics

Programmable ........................Use PC or the hand operator
Measuring range..................... Set via PC with special interface or by the hand operator

Input type............................... RTD, TC, R or Millvolt signal

Convert accuracy ....................≤0.1%FS

Cold junction accuracy ............±1°C(TC)

Output ...................................4~20mA/20~4mA Electrical isolation output HART Protocol output

Max-load............................... (V-13V)/0.025A(Current output )

Limit current ...........................≤25mA

Response time........................ 1s

Isolated voltage .......................1500VAC(input/output)

Alarm signal............................ Programmable

Below themeasuring range Output drops to 3.8mA

Higher than the measuring range Output rises to 20. 5mA

Sensor faults Setting as≤3.6mA or ≥21.0mA
Power supply ..........................13~30V DC

Temperature drift ......................0.01% FS/1°C

Long-term stability.................... ≤0.1°C per year or 0.05 %per year

Ambient.................................. -40~+85°C

Field of application

Temperature head transmitter with HART® -protocol for converting various input signals into a standard 4 to 20 mA analog output signal

Input:
Resistance thermometer (RTD)
Thermocouple (TC)
Resistance transmitter (Ohm)
Voltage transmitter (mV)

HART protocol for front end unit or panel unit operation using the hand operating
module (MS275, MS375,PDA N800,PDA S900) or PC

Electrical Connective Diagrams

Wiring Diagram

Size(mm)