1.Hot and cold temperature impact test chamber
2.compressor form France
3.temperature accuracy +/-0.5C
4.3 years warranty
Port: YanTian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 300 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: By wooden case
Delivery Detail: Within 25 days when get 30% downpayment.
Hot and cold temperature impact test chamber
Equipment summary
Hot and cold impact testing machines used to test the change of material under extremely high temperature and extremely low temperature environment that continue alternation in the shortest time, Testing the chemical changes or physical damage of material caused by the thermal expansion and contraction. Testing box divided two parts, one is high-temperature region, another is low-temperature region, the testing sample placed on the moving basket, using unique heat storage and cool storage, the cylinder taking basket moves up and down in the hot and cold region to complete the hot and cold temperature impact testing; applied to test the material, including metal, plastic, rubber, electronics .... and other materials, it can be used as a basis for improvement of their products.
Corresponding standard
1 GB/T2423.1-1989 low-temperature testing method
2 GB/T2423.2-1989 high-temperature testing method
3 GB/T2423.22-1989 change temperature test
4 GJB150.5-86 temperature impact test
5 GJB360.7-87 temperature impact test
6 GJB367.2-87 405 temperature impact test
Applicable industries
Widely used in aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, technical supervision departments; building materials ceramic; petroleum and chemical products, machine and spare parts.
Technical parameters
Model | HZ-2012A |
Temperature range | A.high-temperature : +60 degree to +150 degree |
B.low-temperature : -10 degree to -40 degree | |
Control temperature | ±2 degree |
resolution | 0.01 degree |
Heating time at high-temperature region | From RT to 150 about 35min (RT is from 5 degree to 30 degree). |
Cooling time at low-temperature region | From RT to -40 degree about 50min (RT is from 5 degree to 30 degree) |
Moving time and temperature recover time | A. testing bastet moving from high-temperature to low-temperature spend 10sec |
B.after exchanging the temperature,the tempreature recovery time: 3min to 5min (Stabilization time ≥ 30min) | |
Device noise | Below 75dB. |
Weight | 10Kg |
Testing region(hot and cold) | 50cm(W)*50cm(H)*50cm(D) |
Outside size: | 140cm(W)*180cm(H)*142cm(D) |
Testing basket size | 30cm(W)*40cm(H)*30cm(D) |
Inside material | SUS#304 Cold-Heat-resistant stainless steel |
Outside material | SUS#304 Cold-Heat-resistant stainless steel |
Insolution material | High-density glass wool and high strength PU foam insulation |
Anti-sweat structure | insulation layer and door micro-thermal anti-sweat |
Expansion | Heat reach 300 degree,cold reach -100 degree |