Model GBR Hot Tack Tester,
is applicable in hot tack property test for flexible ,semi-rigid packaging materials , pipe materia
Port: Guangzhou
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 5 Set/Sets per Quarter
Payment Terms: T/T
Contact SupplierPackaging Detail: by wooden case
Delivery Detail: 15 working days
Model GBR Hot Tack Testing Machine
Specifications
Temperature range | room temperature~250ºC |
Temp. control accuracy | ±0.2ºC |
Dwell pressure | 0.04MPa~0.8MPa |
Dwell time | 0.1s~99s |
Tack time | 0.1s~99s |
Accuracy | ±1% of reading force |
Measuring range | 0-300 N |
Width of specimen | 15mm or 25 mm or 25.4 mm (Optional) |
Length of specimen | 200 mm |
Dimension | 600mm(L) ×300mm(B) ×220mm(H) |
Power | AC 220V 50Hz/60Hz |
Net weight | 62kg |
Standards:ASTM F1921,ASTM F2029,QB/T 2358(ZBY 28004),YBB 00122003
Test principle
Clamp the two ends of the specimen by the static jaw and dynamic jaw, the driver moves the dynamic jaw, which produces relative movement. Tester gets electronic signal from the load cell after the specimen suffers the force. After analysis, get the data of hot tack, peel, tension. It can print out the report if needed.
Note: Hot Tack Tester tests the strength of a specimen at a specified time interval (tack time) after completion of heat-sealing in melting state but prior to the temperature cooling down to room temperature.
Configuration
Standard: Mainframe, footswitch, hot tack clamp, calibration frame
Optional: software, communication cable, non-standard seal jaws, test board, Welding Cloak, non-standard jaws, sample cutter, non-standard specimen