Hot Selling Pumps and Motors Inspection Instruments
1.Dimension:295x265x210mm
2.Gross Weight :30kg
3.Warranty:1 year
Port: Qingdao
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Year
Payment Terms: T/T
Contact SupplierPackaging Detail: in Box or according to customers' requirements
Delivery Detail: about 15 days
Hot Selling Pumps and Motors Inspection Instruments
Testing conditions:
Before the installation of this tester, oil-supplying situation of the hydraulic system, oil pump rotation rate, oil pipeline and Cylinder Piston Rod and oil leakage should be first checked.
Test method:
There are many testing methods by using hydraulic pressure tester, the specific application can be conducted according to the specific circumstances. But remember one point: understand the system graph and be sure no jam in the pipeline. During using the tester, the simplest and the most effective test method is: Serial Test
Example 1: Hydraulic pump ( power components) test:
1) The tester can be installed between the oil inlet and oil return tank. Make sure the oil wholly pass the tester.
2) Fully open the loading valve, read the maximum flow when pressure is "0".
3) By loading valve raise the oil pressure. Record the flow rate from 0 to specified value or maximum value in order to determine the technical condition of the pump.
4) Now refer the specifications of the hydraulic pump manufactory to check the rated flow ----oil pump efficiency.
model | Max flow (LPM) | Max pressure(bar) | Temperature | Precision | Dimension(mm) | Weight(KGS) |
MYHT-1-2 | 200 | 420 | 150°C | ±1% | 295x265x210 | 6.1 |
MYHT-1-4 | 400 | 420 | 150°C | ±1% | 295x265x210 | 8.8 |
MYHT-1-5 | 500 | 420 | 150°C | ±1% | 295x265x210 | 10.2 |
MYHT-1-7 | 800 | 420 | 150°C | ±1% | 310x285x261 | 14 |