Specifications and Product Details:

Detailed Product Description

Thermal shock test chamber

1.High formula memory capacity
2.Color touch panel control system
3.Multiple safety protection

Thermal shock test chamber is applicable to aerospace products, information electronic instrumentation, materials, electrical, electronic products and a variety of electronic parts , test their performance index in high-low temperature environment. It is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.
Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
Both 2 zone and 3 zone shocks can be chosen.
All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
Machine can be shut down automatically in case of electrical power instabilities.

Specification:

Model	TT-50TST
Interal Dimension:	(W×H×D)40×36×35 cm
Structure:	Two chambers design(the hot chamber or the cold chamber)
Damper device:	Forced air drived damper
Interior material:	SUS# Stainless steel plate
Exterior material:	SUS# Stainless steel plate
Basket material:	SUS# Stainless steel plate
Refrigeration:	Cascade refrigeration system
Cooling method:	Water
Ambient temperature:	0°~30°
Preheating temperature:	above freezing 60.00°C~above freezing200.00°C
Precooling temperature:	subzero 10.00°~ subzero 70.00°C
H.T. Shocking:	above freezing 60.00°C~above freezing 150.00°C
L.T. Shocking:	subzero 10.00°C~subzero 65.00°C
Temperature uniformity:	±2.00°C
Simulated load ic	5.0kg
HT IN-Zone	subzero 65.00°C~above freezing 150.00°C/5min
LT IN-Zone	above freezing 150.00°C subzero 65.00°C
Preheating time:	30MIN
Precooling time:	60MIN
Senor:	T×4
Controller:	OYO-8226
Setting range:	Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999
Resolution:	Temperature:0.1°C
Output mode:	PID and SSR(control method)
Power(K.W)	AC380V 50HZ 18KW

Features:

1. Material quality of inner box is SUS304 # mirror-face stainless steel imported, and outer box is steel plate and the paint. Box body is processed shape using CNC machine tool, its shape is beautiful and fine.

2. Heat preservation material used glass fiber cotton of high-intensity PU foam and high density, which can avoid unnecessary energy loss.

3. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design, built-in lights to facilitate the test sample state of real-time observation in the course of testing.

4. Large-size LCD display screen, simple operation, easy to edit programs. PID with automatic calculation function, show failure message .

5. An RS-232 communication interface, matching recorder, strong expandability.

6. With timing contact, and be able to cope with dynamic testing and measure test.

7. The system-wide multi-security protection and power-cut memory.

8. Freezer imported by the French original armored warrior compressor and use environmental-friendly refrigerant (R134a, R404a, R23).

9. Frozen system uses units or low-temperature dual-loop system design.

10. Use more powerful wing-blower air supply cycle, to avoid any dea, d end, temperature and humidity are evenly distributed in the test region.

11. Wind-road cycle adopted the design of blowing side wind and return wind. Wind pressure and wind speed are in accord with test standards, and make the door instantaneous temperature and humidity open that is stabilized time soon.

12. Heating and cooling system is totally unaided to improve efficiency, reduce testing cost, increase life expectancy and lower failure rate.

Dongguan TEST Equipment CO., LTD professionally engaged in the development, design and production of reliable environment testing equipment and all kinds of testing machines, has an efficient and professional team which has its own machine design and software developing ability. Testing equipments our company produces accords with the test standards, such as GB,ISO,BS,ASTM,UL,JIS,CEEN , DIN and so on.

Our company purpose: Quality first, Integrity service.
Our company philosophy: compete for clients with quality, serve clients with benefit and increase clients with clients.