1.Test speed up to 15ms
2.Test frequency:50Hz-100kHz
3.Internal DC bias source up to 200mA
4.Replace Agilent 4263B
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Week
Payment Terms: T/T
Contact Supplier
Product Model: | TH2825A | ||||||||||||||||||||||||||
LCR tester series | |||||||||||||||||||||||||||
LCR test parameter | |Z|,R, X, G, B, C, L, Q, D, θ(deg), θ(rad) | ||||||||||||||||||||||||||
Test frequency | 50Hz,60Hz,100Hz,120Hz,1kHz,10kHz,20kHz, 40kHz, 50kHz,100kHz, totally 10 points | ||||||||||||||||||||||||||
Test level range | 10 mVrms—1.0 Vrms, with step of 1mV (f <200mV),step 10mV(f≥200mV) | ||||||||||||||||||||||||||
Output impedance | 25Ω,50Ω,100Ω, 25Ω/100Ω,C.V.(constant voltage) | ||||||||||||||||||||||||||
Basic accuracy | 0.1% | ||||||||||||||||||||||||||
Test speed or time | >100Hz,fast: 15ms(note 1), middle: 66ms, slow: 500ms | ||||||||||||||||||||||||||
Equivalent circuit | Serial and parallel | ||||||||||||||||||||||||||
Range mode | Auto,hold | ||||||||||||||||||||||||||
Trigger mode | Internal,manual,external and Bus | ||||||||||||||||||||||||||
Average time | 1-255 | ||||||||||||||||||||||||||
Correction function | Open,short,load | ||||||||||||||||||||||||||
Internal DC Bias source | Internal fixed±2VDC, External 0~±5VDC adjustable when 100Ω,±50mA Max when 25Ω,±200mA Max | ||||||||||||||||||||||||||
Comparator function | 9 bins:(8 bins pass,1 bin fail),and a AUX bin high pass/pass/low pass comparator | ||||||||||||||||||||||||||
Memory | 12 groups of storage and load | ||||||||||||||||||||||||||
Interface | RS-232C, HANDLER,GPIB(option) | ||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||
Transformer test parameter | DCR, DCR2,M, Turns, N,1/N,L2A,L2B | ||||||||||||||||||||||||||
List sweep | 4 points frequency/level list sweep function | ||||||||||||||||||||||||||
Displayer | 240×64 dot matrix LCD | ||||||||||||||||||||||||||
Display mode | Direct read, ΔABS, Δ%, V/I(voltage/current monitor) ,bin No. and count |