1.CE
2.High degree of protection
3.Easy to install
Port: Ningbo/Shanghai
Minimum Order Quantity: 50 Unit/Units saip
Supply Ability: 500000 Unit/Units per Week saip
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Standard export packing
Delivery Detail: 3-7days
1.It has becomemore andmore important to provide a protected enclosure environment for valuable and crucial electrical and electronic components.
2. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation.
3.When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically.
4.The specially designed pressure compensation device DA 084 permits a controlled change in pressure.
5.It can be installed easily in any enclosure. because of the pressure compensation plug's high degree of protection (IP450), the protection type of the enclosure will not be affected.
Mounting | PG 29 thread with union nut | ||||
Torque | 5Nm (max. 10Nm) | ||||
Material | plastic according to UL94 V-0, pebble grey | ||||
Sealing | sealing gasket NBR | ||||
Air interface | approx. 7cm² | ||||
Dimensions | Ø 65.5mm x 30.5mm | ||||
Fitting position | vertical* | ||||
Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
Protection type is restricted to IP54 if fitting position of DA 084 is not vertical.
Installation Make cut-out Ø 37+1mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
Art. No. | Protection type | 1 packing unit | Weight (approx.) | |
08400.0-04 | IP55 | 2 pieces | 62g (31g/pc.) | |