designed as improved model for environment test, installation high and low temperature test chamber.
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: Plywood Packaging
Delivery Detail: 45-60 days
YL-1162 High and Low Temperature Tensile Tester ( Max capacity of 1000KG)
Product Description:
High and Low Temperature Tensile Tester is designed as improved model for environment test, installation high and low temperature test chamber.
It can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial
adhesion strength and other physical performance.
It can remove the chamber to increase using space, and bring much convenience when using room temperature tests.
Machine Specifications:
1.Max. Load: 1000KG;
2.Capacity: 1,2,5,10,20,50,100,200,500,1000 kg;
3.Have Dush Cover, Protective Shell, Precision Ball Screw to increase the service life and accuracy
4.High and low temperature test box can be removed to increase the use space and convenience
while having the room temperature test.
5.Hardware Security: The upper and lower limit, Emergency Stop Button
6.Machine Dimension: 110×160×220cm(W×D×H) cm
Machine Power:
1. Servo Motor Drive
2. Transmission Type: Ball Lead Screw with Timing Belt to reduce noise
3. Speed Range: 0.5-500 mm/min, adjustable
4. Load Cell:Comply with the provisions of ASTM-E4, within the scope capacity error of 0.5%, using the bridge circuit sensor output, can do pull and stress test.
Detailed Specification:
Capacity | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation) |
Temperature Range | 0, -20, -40, -60, -70°C~150°C |
Display | Computer display mode |
Force Resolution | 1/250,000 |
Force Accuracy | ≤±0.5% |
Stroke Resolution | 0.005mm |
Control Mode | Tensile tester all computerized operation mode |
Temp. Control | PID automatic calculation, stable error |
Display Accuracy | 0.1°C |
Temp. Accuracy | ±1°C |
Circulation System | Fan force circulation system |
Heating System | stainless steel heat radiation type of heater |
Cooling System | Fan cooling type, high-efficiency compressor, environmental protection cooling medium |
Protection Device | Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device |
Chamber Material | SUS#304 stainless steel |
Test Stroke | 1300mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Width | 720mm (after removing chamber, stand-alone operation and use tensile machine) |
Test Speed | 0.5~500mm/min, can set by computer, with up & down fast adjustment button of grips |
Force Unit Switch | Kgf, N, Ibf, g, ton, Mpa |
Stop Mode | Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function |
Machine Dimension | 110×160×220cm(W×D×H) cm |
Machine Drive | Servo motor drive, synchronous wheel and precision ball screw drive |
Power | 400W |
Machine Weight | About 420kg |
Power Supply | 220V 50/60HZ 30A |
Standard Device | Extension pole of grips Heat abstractor 1 set of grips Computer software USB computer connection wires |
Optional | Personal computer |