High Temperature Thermocouples with Aluminum Ceramic Tube for Coke Oven - for coke oven

High Temperature Thermocouples with Aluminum Ceramic Tube for Coke Oven

1.industrial thermocouples for coke oven
2.temperature sensors for steel plant(special steel plant,cast steel plant,mini steel plant,electric steel plant,iron and steel plant)

3.thermowells for coke oven and blast furnace

4.temp. 0 to 1800C
5.platinum rhodium thermocoupels
6.alumina probe

Introduction

Naturally found coal is converted into coke in the coke oven for use in Blast Furnaces. Precise Temperature Control is require in the Coke Oven in order to ensure complete removal of Volatile matter, Ash, Moisture & Improve the Crushing strength of coke.
Thermo Sensors Thermocouples, Especially for Coke Oven, not only ensures precise temperature control but also provides long life. The rigorous Protection tube made from Engineering Ceramics can withstand extreme temperature conditions along with Flue gases, thereby giving an edge over competitors.

main specification
1.installation means:PTEE material screw and flange

2.junction box:PVC junction box and 316L junction box

3.widely graduation mark :K ,strong inoxdiability

4.material of thermocouple:ni-cr/ni-al

5.installation means:fixed screw/flange,moveable screw/flange,cutting flange

6.mode of connection:junction box,direct lead wire,socket ,handle

7.protective tube diameter:10mm,12mm,14mm,16mm,20mm,25mm

8.junction box electric mout:M20*1.5,NPT1/2

9.protective grade:IP65

order guidelines

1.measuring temperature range

2.total length and insert depth

3.diameter and material of probe

4.installation means:flange or screw or only probe and specification of screw and flange

5.accurtacy grade:I II

6.protection grade such as explosionrpoof,water-proof,wear-resisting,anti-corrossion

company website:http://cqhaichen.en.alibaba.com/