High Temperature Thermocouples for Blast Furnace - for blast furnace

High Temperature Thermocouples for Blast Furnace

1.temperature sensors for blast furnace
2.thermocouples for steel plants
3.thermowells for casting and foundary

4.temperature range:up to 1300DC

main specification
1.installation means:PTEE material screw and flange

2.junction box:PVC junction box and 316L junction box

3.widely graduation mark :K ,strong inoxdiability

4.material of thermocouple:ni-cr/ni-al

5.installation means:fixed screw/flange,moveable screw/flange,cutting flange

6.mode of connection:junction box,direct lead wire,socket ,handle

7.protective tube diameter:10mm,12mm,14mm,16mm,20mm,25mm

8.junction box electric mout:M20*1.5,NPT1/2

9.protective grade:IP65

Applicaiton introduction

Blast Furnace is the heart of Integrated Steel Plant. Thermocouples used in Blast furnace faces the most challenging temperature & flue gas conditions. The temperature extremity along with flue gas corrodes the outer sheath of Thermocouple resulting the failure of T/c in not more then a month. With years of experience & expertise in thermocouple Engineering, Thermo Sensors has developed a special design, specifically for Blast Furnace to give long life, thereby reducing the cost.

Specifications

Temperature extremity along with flue gas corrodes the outer sheath of Thermocouple results the failure of T/c in not more than a month.

a whole range of high pressure and high velocity resistant protection tubes or solid

drilled and machined thermo wells.

order guidelines

1.type

2.using temperatuer

3.diameter of thermocouple

4.total length and insert depth

5.diameter of protective tube

6.installation means

7.accuracy and protective grade

company website:http://cqhaichen.en.alibaba.com/