1.right angle thermocouple for cement furnace,rolling klin
2.ceramic tube for thermocouple
3.temp. 0 to 1600C
4.anticorrosion
Port: Chongqing
Minimum Order Quantity: 1 Piece/Pieces customized
Supply Ability: 2000 Piece/Pieces per Week customized
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: standard exported package according to your demand
Delivery Detail: in one week
High Temperature Angle Thermocouples for Cement Rolling Klin
1.industrial bending thermocouples for cement furnace
2.temperature sensors for cement industry
3.rtd thermometers for rolling klin
4.high temperature and poisonous gas temperature measuring thermometers
5.be suitable for Virtically installed and horizontal application occasions.
6.widely graduation mark :K ,strong inoxdiability
7.material of thermocouple:ni-cr/ni-al
8.installation means:fixed screw/flange,moveable screw/flange,cutting flange
9.mode of connection:junction box,direct lead wire,socket ,handle
10.protective tube diameter:10mm,12mm,14mm,16mm,20mm,25mm
11.junction box electric mout:M20*1.5,NPT1/2
12.protective grade:IP65
Introduction
A cement kiln is the world's largest moving manufacturing machine. The raw materials are completely dried by the heat as they slowly tumble down the tube toward the 2,500ºF. flame.
Kiln Stability, operation and performance optimization requires accurate kiln temperature. Finding a reliable, accurate temperature measurement method that withstands the very hot and abrasive conditions around the kiln has been a problem.
Frequent replacement of thermocouples not only adds up to the cost of maintenance but also frustrates the Engineers & labors in changing process. Thermo Sensors can provide long lasting thermocouples for your Kilns, thereby reducing your replacement cost.
Name | Calibration | Tolerance | |||
PtRh10-Pt WRP or WRPK | S | Class l | Classll | ||
Tolerance | Temperature range°C | Tolerance | Temperature range°C | ||
±1°C or ±(1+(t-1100)×0.003) | 0~1300 | ±1.5°C or ±0.25%|t| | 0~1300 |
order guideline
1.using temperature
2.diameter of thermometer
3.diameter and length and material of the two duplex probe
4.installation means(specification of screw and flange or neither)
5.protective grade
6.accuracy grade
company website:http://cqhaichen.en.alibaba.com/