Hammer Impact Brinell Hardness Tester
1. Test Force:1580kg
2. Error of test:< 5%
3. Indenter:7.26mm steel ball indenter
Port: qingdao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 200 Set/Sets per Week
Payment Terms: T/T
Contact SupplierPackaging Detail: cartoon
Delivery Detail: within 5 days
Hammer Impact Brinell Hardness Tester
Main Features:
According to the Brinell hardness test principle, applying the test force by hammer impact, exactly controlling the test force by a shear pin, leaving a round Brinell indentation on the test piece after testing, reading out the indentation diameter by the reading microscope, check the hardness table to get the correct Brinell hardness value.
According to the similarity principle of Brinell hardness testing, this tester employs 1580kg test force, 7.26mm ball indenter, F/D2=30, the test condition is equivalent to the commonly used 3000kg test force, 10mm ball.
The test force is great, so the roughness of the surface does not matter much.
The test result has good stability and repeatability thanks to the exact control of the test force.
The test error is 5~6% of it, the accuracy is far higher than the old type hammer impact Brinell hardness tester.
The testing cost is low by using only 1 cheap shear pin in each test.
Easy, simple operation and quick testing without sampling.
Usage Range:
It can be used for testing the hardness of large-size, inconvenient-to-move or unable-to-cut forgings, castings etc.
Technical Specifications:
Test Force: | 1580kg |
Error of test: | < 5% |
Indenter: | 7.26mm steel ball indenter |
Test range: | 100~350HB (extendable to 100~650HB) |
Indentation reading resolution: | 0.01mm |
Microscope: | 20X |
Net Weight: | 2.3kg |
Package Gross Weight: | 3.8kg |
Package Dimensions: | 390mm×280mm×160mm |