Type | HXD-1000TMC | Lens/Indenter switch | With Motorized Turret | Test force | 9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 N 1000,500,300,200,100,50,25,10gf | Loading mode | Program-controlled application, duration and removal of load | Duration time | 5-60 sec selectable, (In step of ) 5 sec. | Measuring range | 5 HV-3000 HV | Microscope | Objective: 40x; 10x(For observation only), Eyepiece: 15x Total: 600x; 150x (For observation only) | Magnify on TV | About 2000x | Min. detection | 0.025 µm | Measuring and reading mode | Auto or manual measurement, picture analysis, accurate correction, Print out or save in files the measured data, image, graphs and layer hardness gradient graph.. | Max. test height | 85 mm | Standard attachments | Objective 40x,10x, Vickers indenter (Built on tester) Standard hardness block Sheet specimen clamp Thin cylinder clamp Parallel-jaw vice Computer with MH software installed TV Display, CCD Camera, Printer | Options | Knoop indenter | Power supply | 220 VAC, 50/60 Hz | Dimensions | Main tester: 54 x 50 x 64 cm (Packing size) | Gross weight | 80 kG |
|