HV-1000ZDS Auto Turret Digital Micro Hardness Tester HV-1000ZDS

Specifications and Product Details:

Auto Turret Micro Hardness Tester with Dual Imaging System ((HV-1000ZDS)

The third new-type digital micro hardness tester is the high-technology product integrated with optics, mechanics and electricity. The machine with beautiful design, stable functions and simple operation adopts fine mechanic technique and photoelectricity technique.

Main functions and features

1. Built-in dual-imaging system, the machine can be connected with computer just through one data line. Used the optional purchase accessories image analysis software to analyzing the physical and chemical properties of the material.

2. Special designed for improving the working efficiency of our customers as its automatically design. After adjusting the focal length, the objective lens and indenter can be switched automatically. And the testing force can load, dwell and unload automatically. Then the objective lens will automatically return to the initial focus state, and the length of indentation can be measured directly.

3. The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process.

4. The optical system designed by senior optical engineer (who worked in the Shanghai Optics And Fine Mechanics Institute, Chinese Academy of Science) not only meet the definition of hardness testing requirements, but also can observe the microstructure of the material.

5. With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG.

6. Testing method, testing power and duration time can be displayed directly on the LCD screen.

7. The hardness value can be displayed directly by entering the indentation diagonal length and avoid the complication of the look-up table.

8. According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation.

9. The testing data able to be printed directly by the built-in printer.

Main purpose and the scope of the application

1. Testing the hardness of metallographic structure, from the most soft material to the most hard material.

2. Carburizing, nitriding, hardened layer, surface coating, steel, nonferrous metals.

3. The hardness of the glass, ceramic materials.

Specifications

Models	HV-1000ZDS
Testing Force	10g (0.098N),25g (0.245N),50g (0.49N),100g (0.98N ),200g (1.96N),300g (2.94N),500g (4.9N),1000g (9.8N)
Scale	HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1,HV2
Min. Measuring Unit	0.25μm
Hardness Value Rang	1HV-4000HV
Hardness Value of Reading	Digital LCD Screen
Total Magnification of Microscope	100X(For Observation),400X(For Measurement) (Can be extended to 200X or 600X)
Loading Method	Automatically(Load, dwell and unload the testing force)
Duration Time	1-99s
Switch Type of Objective lens and Indenter	Auto Turret(Objective Lenses-Indenter-Objective Lenses switching Automatically)
Specimen Allowing Maximum Height	85mm
Distance from Indenter Center to Fuselage	110mm
Overall Dimension	405×290×480mm(L×W×H)
Net Weight	45kg
Light Source	LED Cold light source (can be continuous use for 24 hours, servicing life can reach 100,000 hours)
Power Supply	110V/220V + 5%, 50/60 Hz
X-Y Testing Table	Dim.:100×100 mm,Max. Travel Range: 25×25mm,Moving Resolution Ratio 0.01mm (X-Y Digital Testing Table with digital LCD Screen for Optional)
Image Output	Built-in CCD (through the data line can be directly connected to the computer)
Data Output	Built-in Printer(Hardness Value, The Max. And Min. Value, Testing times and Average Value) Built-in RS-232 interface
Executed Standard	GB/T4340.2 Chinese Standard, JJG151 Inspection Rules
Standard Accessories	1 Piece: 10X micrometer eyepiece ; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Lever bubble vail; Power cable; Dust-proof cover; Instruction Book; Hardness Conversion Tables; Certificate of quality; Warranty Card; Accessory case; Hardness measurement of image analysis software CD-ROM; Image acquisition card; Dongle 2 Pieces: Standard Hardness Blocks 4 Pieces: horizontal adjusting screw
Optional Purchase Accessories	Image Analysis Software; Metallographic Structure; Brand of computer and Printer; Knoop Hardness Block; 15X micrometer eyepiece; 2.5X Objective lens; 20X Objective lens; 60X Objective lens