1.Display : 5999.
2.AC/DC Voltage to 750V/1000V
3.DC/AC Current to 600A
Port: ZHUHAI
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union,paypal
Contact SupplierPackaging Detail: Ctn size: 490*290*460mmQTY / Ctn: 30pcsGw/Nw: 18/17KG
Delivery Detail: 30days
1. Function
DC/AC Voltage, DC/AC current, Resistance, Capacitance,Transistor hFE test, Diode and Continuity Test,Temperature,Frequency, Duty Cycle ,Inductance,Manual Range.
Display : 5999.
AC/DC Voltage to 750V/1000V
DC/AC Current to 600A
Temperature : -40~1000
Frequency:10Hz~10MHz
Duty Cycle:0.1%~99.9%
BACK LIGHT
HOLD
Safety:According to EN61010-1 protection class overvoltage category(CAT II ) pollution degreen 2.
Power supply : 9V Zinc-carbon battery .
TRUE RMS
BAR GRAPH DISPLAY
New-style/patent Back Light
Mechanical Protect Function
SPECIFICATIONS:
DC voltage `AC voltage 60 mV, 600mV, 6V, 60V, 600V,750V
DC Current 600μA , 6000μA ,60mA, 600mA, 6A,10A ,600A
AC current 600μA , 6000μA ,60mA, 600mA, 6A,10A ,600A
Resistance 600Ω,6kΩ, 60kΩ, 600kΩ, 6MΩ,60MΩ
Capacitance 40nF,400nF, 4µF,40µF,400µF,4000µF
Frequency 10Hz,100Hz, 1000Hz, ,100kHz, 1000kHz, 10MHz
Temperature -50~700oC, -58~1292 Fahrenheit
Diode test and Audible Continuity Test:
Forward DC current approx 1.5mA.Reversed DC voltage approximately 3V.
Built-in buzzer sounds if resistance is less than 50Ω
Certificate: CE Approval
2. Packing
Each item in Color Box
Dimension: 190mm×88.5mm×27.5mm
Ctn size: 490×290×460
QTY / Ctn: 30pcs
Gw/Nw: 18/17KG
Production lead time: 30 days
Payment term : T/T IN ADVANCE OR L/C AT SIGHT
Remarks: FOB Zhuhai
605A Clamp Adapter
use instructions
DC and AC 600A Current Measurement
( Should working with 760D/E multimeter together )
Set the selector switch of multimeter to desired “600A ” position.
Connect the black banana plug of the AC/DC Special Current Clamp Adapter to "COM" socket and the red banana plug to the "µA mA" socket.
Press “SELECT” button on the multimeter and push AC/DC button on the Clamp Adapter to choose “DC” or “AC” measurement .
When perform DC current measurement, always push “REL” key until the multimeter reads zero.
Clamp the Jaws around the one conductor to be measured. Center the conductor within the Jaw using the Centering Marks as guides.
Read the result from the multimeter LCD panel. The arrow in the Jaw indicates the DC current direction of positive current flow (positive to negative).