TB2 torque reference transducer was developed as a reference and transfer transducer for use in on-site calibration,
Port: SHANGHAI
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: CARTON BOX
Delivery Detail: 3-6 DAYS
The TB2 torque reference transducer was developed as a reference and
transfer transducer for use in on-site calibration, for example, for
calibrating rotating torque transducers without having to remove them from the
test stand. Nominal (rated) measuring ranges of 100 Nm, 200 Nm, 500 Nm, 1
kNm, 2 kNm, 3 kNm, 5 kNm and 10 kNm are available.
The TB2 reference transducer attains very high accuracy. In
conjunction with a DKD calibration certificate it achieves best class
0.05 per DIN 51309 or EA 10-14. The standard for this class requires a range
of 40% to 100% of the nominal (rated) torque for the values of the measuring
range. TB2 goes even beyond the standard requirements and achieves 10 to 100% of
the nominal (rated) torque.
As well as its extreme accuracy, it is also particularly noted for its
extremely low sensitivity to parasitic influences, such as bending moments and
transverse forces. Thanks to its enclosed measuring body geometry, it is also
extremely resistant to environmental influences, such as fluctuations in
temperature. The patented, compact measuring body geometry is the same as in the
T10FS torque flange for rotating torque measurement.
Although originally developed for use under industrial conditions, its
top-class precision also makes it suitable for use at top level as a
transfer transducer for torque calibration under laboratory conditions.
As well as being used for calibration tasks, the TB2 is also eminently
suitable for taking other, non-rotating torque measurements. For use under
extremely difficult environmental conditions, it is advisable to use the
hermetically sealed version, offering IP67 degree of
protection.