BU18 build-up system was developed to measure or calibrate large compressive forces as a smaller and less expensive alternative
Port: shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: cartons
Delivery Detail: in stock now
The BU18 build-up system was developed to measure or
calibrate large compressive forces as a smaller and less expensive
alternative to existing direct loading machines. The system comprises three
precision force transducers mounted in parallel onto which the force is
distributed.
The BU18 build-up system is based on HBM’s C18 compressive
force transducer because of its compact dimensions and high accuracy; the
C18 can attain an accuracy of Class 00 per ISO 376. A junction box for parallel
connection of the output signals of the three transducers is included in the
scope of supply.Normally direct loading calibration machines are used for
calibrating force transducers in national institutes and industrial calibration
laboratories. With very large forces in the range of meganewtons (MN) these
machines are extremely big and expensive.An alternative to direct loading
machines is calibration by comparison using reference force transducers.
However, the reference transducers also need to be calibrated and direct loading
machines of adequate size for this task are not available.
HBM has supplied the first BU18 build-up system to the Romanian
National Force Laboratory where it is used as a National Standard. The
system has a maximum capacity of 3 MN.
Build-up systems with different
maximum capacities are available on request.