Solid Material Elasticity Tester
Resonance frequency, Internal friction
Elasticity modulus, Shear modulus, Poisson ratio
Port: Tianjin
Minimum Order Quantity: 1 Set/Sets /Piece
Supply Ability: 20 Set/Sets per Month or more
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Wooden case
Delivery Detail: 30 days after order
GTC-2 Solid Material Elasticity Tester
I. Test result of this instrument
1. Resonance frequency
2. Damping or internal friction
3. Elasticity modulus
4. Shear modulus
5. Poisson ratio
II. Specifications
| Max sampling frequency | 2MHz |
| Gain setting | 1-128(1, 2, 4, 8, 16, 32, 64, 128) |
| Frequency response range | 20-20kHz |
| Sensitivity | 50 mv/pa |
| Input impedance | 1MΩ, parallel connected with 27pF |
| Time-base range | 10ns ~ 1 sec/div |
| Time-base accuracy | 50ppm |
III. Main features
This instrument is of high accuracy and easy operation. Through one-time impact (Excitation), it can measure the following data quickly and precisely at the same time: Resonance frequency, Elasticity modulus, Shear modulus, Poisson ratio as well as internal friction. Test results have a good repeatability. The test wont give any disruption to the specimen. A high-temperature oven can be used to measure the high-temperature elasticity performance of the solid materials.
The instrument, which is highly integrated, realizes data communication through USB interface. The hardware has high reliability, strong anti-interference ability and high noise-signal ratio. This instrument with pretty appearance and stable property is easy to be added with high or low temperature device to change the test condition.
IV. Configurations
| Main unit | 1 pc |
| Sensor | 1pc |
| Preamplifier | 1pc |
| Exciter | 1pc |
| Excitation hammer | 1pc |
| Test supporting frame | 1pc |
| Sensor holder | 1pc |
| Power adapter | 1pc |
| USB connection line | 1pc |
| Test software | 1set |
| Softdog | 1pc |
| Storage box | 1pc |
| Laptop | 1pc |
Model No.: YDS
Features: 1.Prior and durable design
2.Low noise
3.Light weight
4. Warranty 1year
5. ISO: 9001: 2008,CE standard
Model No.: YDS
Features: 1.Screen up to 500mesh
2.Deft design
3.Widely Used in lab analysis
4.ISO9001:2008
5.Warranty 1 year
Model No.: YDS
Features: 1.Durable in use
2.Low noise
3.Small volume and space-saving
4.Warranty 1year
5.ISO: 9001: 2008,CE standard
Model No.: RS-8309
Features: Shoe Lace abrasion testing machine is simulates lace under reciprocal abrasion at a specified tension to determine its life.
Model No.: PZJ(LTP)
Features: 1.Small volume and space-saving
2.Low maintenance
3.Deft design
4.Warranty 1year
5.Long service life
Model No.: PZJ(LTP)
Features: 1.Long service life
2.Small volume and space-saving
3.High screening efficiency
4.Warranty 1year
5.ISO9001:2008
Model No.: PZJ(LTP)
Features: 1.High screening efficiency
2.Durable
3.Long service life
4.Low maintenance
5.ISO9001:2008
Model No.: PZJ(LTP)
Features: 1.Good consistency
2.High transmission accuracy
3.High screening efficiency
4.Long service life
5.Low maintenance
Model No.: PZJ(LTP)
Features: 1.Good consistency
2.Deft design
3.Long service life
4.Low noise
5.High screening efficiency
Model No.: ST2024
Features: 1. dry shrinkage rate
2.swelling rate of expanding
3.. Dial gauge: 10mm
4. Valid testing space: 156-300mm
Model No.: DRK134B
Features: observe and evaluate the bottle cap or closed container seal craft and sealing property, Adopts PLC control; LCD display
Model No.: DRK123
Features: DRK123 Carton Box Compression Tester
Apply in the anti-compression test of corrugated carton,touch screen and computer control