insulation resistance tester
1.With timekeeping function,
2.remind users to record, and analyze absorptance and polarization
Port: Wuhan/Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 600 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: carton or wooden case
Delivery Detail: 20days after everything be confirmed
insulation resistance tester, ground resistance tester,earth resistance tester,surface resistance tester
Products features
1. With strong anti-electric field interference ability up to 2mA (50Hz), it is suitable for 500kV substation without dismantling wire to test insulation resistance of 500kV large-scale transformer.
2. The short-circuit current of test power> 5mA, maximum up to 15mA. Be suitable for testing high capacity and high inductance.
3. Wide resistance range from 0.5MΩ ~ 200000MΩ. With high-resolution, having accurate readings.
4. Wide voltage range: 0.25kV, 0.5kV, 1kV, 2.5kV, 5kV, 10kV, 15 kV, you can smoothly adjust voltage from 0V to the desired value.
5. With timekeeping function, remind users to record, and analyze absorptance and polarization index of measured target.
Technical Specifications
1. Technique specifications
Mode | Test voltage | Voltage accuracy | Short-circuit current |
GM-5kV | 0.25,0.5,1,2.5,5kV | ±(5%+10V) | >5mA |
GM-10kV | 0.5,1,2.5,5,10kV | ±(5%+10V) | >5mA |
GM-15kV | 1,2.5,5,10,15kV | ±(5%+10V) | >5mA |
GM-20kV | 0.5,1,2.5,5,10,20kV | ±(5%+10V) | >5mA |
2. Range and accuracy
Range | Resistance measurement range | Accuracy |
20MΩ/500V | 0.5~19.99 MΩ | ±(5%+5digital) |
200MΩ/1000V | 5.0~199.9 MΩ | ±(5%+5digital) |
2GΩ | 0.05~1.999 GΩ | ±(5%+5digital) |
20GΩ | 0.5~19.99 GΩ | ±(5%+5digital) |
200GΩ | 5.0~199.9 GΩ | ±(10%+10digital) |
2000GΩ | 50~1999 GΩ | ±(20%+10digital) |
Calibration voltage of GΩ range is 2.5kV
**-- 2000 GΩ range is the reference range, its application environment: relative humidity< 70%.
3. Anti-electric field interference ability: 2mA (50Hz)
4. Timekeeping and alarm functions: maximum value of stopwatch is 19 minutes and 59 seconds. 20 minutes for a cycle. The stopwatch will tell the time at these time points: 15 seconds, 60 seconds and every 60 seconds. When telling time, resistance readings hold for 5 seconds. If the measured resistance is below the lower limit of range, the reading is invalid and the instrument will continuously sound to give an alarm.
5. Display: three and a half bits LCD digital meter (three), respectively show test voltage, test resistance, test time.
6. Power supply
DC: 10×1.2Vbattery(2000mAh Ni-MH rechargeable battery), total DC12V power supply
AC: 220V (50/60Hz)
7. Operating Conditions
Temperature: 0°C~40°C
Relative humidity: 20~90%
8. Dimensions:315×240×155mm
9. Weight:5kg