GDH-ND Solidifying Point Constant Temperature Water Bath is used for sample treatment in the range of room temperature60 celsius
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: Wooden Case
Delivery Detail: 15 days after payment
GDH-ND Solidifying Point Water Bath
Purpose:
The instrument is designed and made as per requirements for constant temperature water bath stipulated in the National Standard GB/T510 “Test Methods for Solidifying Point of Petroleum Products”. It is used for sample treatment in the range of room temperature to 60 °C.
Technical characteristics:
1. It uses a two layers cylinder, and electric stirrer, so it can keep temperature stable at controlling temperature.
2. It adopts a digital temperature controller, so it is convenient to set temperature with high temperature controlling accuracy.
3. You can put 7 pieces of solidifying point test tubes and 2 pieces of cold filter plugging point test tubes in the bath, so it can keep temperature of 9 pieces of samples constant at a time.
4. Table structure, newly designed, and it is convenient to be operated.
Technical parameters:
1. Power supply: AC 220V±10%, 50Hz±5%;
2. Heating power: two grades, 1000W and 650 W;
3. Stirring motor:
(1) Power: 6 W;
(2) Speed: 1200 RPM;
4. Measurement range: room temperature ~100°C;
5. Temperature controlling accuracy: ±0.1°C;
6. Constant temperature bath:
(1) Cubage: 20 L;
(2) Types: two layers cylinder;
7. Working environment:
(1) Ambient temperature: -10°C~35°C;
(2) Relative humidity: <85%;
8. Temperature sensor: Industrial platinum; scale number is Pt100;
9. Total power consumption: not more than 1800 W;
Model No.: HZ-2004
Features: espec constant environmental test chamber
1.temperature accurate +/-0.5dgree
2.LCD screen PLC cotrollor
3.France compressor
Model No.: BKR
Features: roller brake tester
to test the brake force
will come with 19" computer, printer, U3 console and software
Model No.: IDEA-UT
Features: 1. Complete ultrasonic flaw detection systems for the in process inspection of welded steel tubes
2.Thickness range: 8-1200mm
Model No.: XXHA-
Features: Inspection Equipment for Boiler Tube
1 Portable Inspection Equipment for Boiler Tube
2 Beam Angle:360x40
Model No.: XXG-3205
Features: 1.Suitable to operate in the open field
2.long service life and low failure rate
3.Wide operative range
4.Max penetration55mm
Model No.: STLLJ-3
Features: Tensile Testing Machine
1.Capacity: 10KN
2.Indication error: within +/-1%
3.Speed rate:10~110mm/min
4.Resolution: 0.2
Model No.: GSMT-H-3A100
Features: 1.Test area: 2000*1200mm
2.Watts: 5W to 300W
3.10ms~100ms pulse width
4.Uniformity: less than 2%
5.10 parameters display
Model No.: SY
Features: 1-Digital test Dielectric strength/breakdown voltage of insulation oil
2-Built in printer
3-IEC, ASTMD rule
4-direct maker
Model No.: BZS
Features: 1.Deft design
2.Low noise
3.Light weight
4.Small volume and space-saving
5.Accord with ISO 9001:2008
Model No.: HY-CRI200B-I
Features: CRI200B-I test bench
1. Power: 15kw
2. Voltage: 380V
3. Electrical system: DELIXI
4. Tertiary filter, 5um.
Model No.: KJ-1700-1400-1200
Features: 1.lab test electric furnace
2.max temperature:1200/1400/1700C
3.capacity:2L,4L,5L,8L,16L,30L etc
4.MoSi2,SiC,resistance wire
Model No.: 360
Features: (1)Rail pipe:Bosch
(2)High pressure pump:Bosch CP3.3
(3)Tertiary filter, 5um.
(4)380V,three phase
(5)Good quality