Purpose
Distillate Fuel Oil Oxidation Stability Tester is designed and made as per the stipulation in the Petroleum and Chemical Industry Standard of Peoples Republic of China SH/T 0175 Test Methods for Oxidation Stability of Distillate Fuel Oil. Test method according to ASTM D2274 and ISO 12205 It is suitable to determine oxidation stability of distillate fuel oil by the accelerating methods.
Main technical characteristics and performance
1. The main unit of the instrument is composed of water bath, flux controlling system, temperature controlling system and cold water circulation system. It is modern.
2. The inner shell of the water bath is made of stainless steel and the outer shell is sprayed with plastic, so the anti-corrosion performance of the instrument is fine.
3. Adopt a digital temperature controller to control the heater and use a stirrer to stir the water bath, so the controlling temperature is in high precision.
4. The flux of oxygen is measured by a flow meter, so that you can adjust the flux of oxygen to meet the requirement of test.
Main technical specification and parameters
1.8 samples can be tested
simultaneously
2.temperature range up to 100,
temperature control stability
0.1,display in safety
features include an
over-temperature cut-off
3.flowmeters have a capability
of measuring 3±0.3 L/H of
oxygen. One flowmeter shall
be provided foreach oxidation
cell
4.Each oxidation test cell
included individual flowmeter
and control valve,all flowmeter,
control valve, test tube,
condenser, and liquid bath are
in same housing
Accessories:
Oxygen delivery tube : 8 PCS x 3
Oxidation test tube : 8 PCS x 3
Condenser : 16 PCS x 3
47 mm , 0.8/filter 5 box x 3
filter device 47mm 2 set x 3
vacuum pump 1/8 HP,30L/min x 3set
siliconc heat transfer fluid
45 L x 6
TYPE: on the ground
POWER supply : AC220V(+,-) 10%, 60Hz