1. Reference standard ASTM D93,
2. Full-automated control of the test procedure,
3. Broad LCD display screen,high precision.
Port: Shanghai
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: standard wooden case
Delivery Detail: within 10 days after receiving the advanced payment.
Introduction
This oil testing apparatus is designed and made as per the Usa standard ASTM D93, and the national standard GB/T261. It is used to test the flash point and fire point of petroleum products by Pensky-Martens closed cup flash point method.
It is a full-automated apparatus. It could be capable of performing the whole test procedure, including control of the heating rates, stirring of the test specimen, application of the ignition source, shut of the cover, detection of the flash point, recording the flash point and printing the test datas.
Characteristics
This instrument has automatic temperature con-trolling function. Its testing arm can be raised up and low down automatically. It can automatically controll the measure procedure, make analysis to
the test data and print the data. It also installed the LCD display screen
Technical Parameters
1. Working Power: AC220V±10%, 50HZ;
2. Testing Temperature: room temp ~300°C;
3. Repeatablity-not above 2°C;
4. Reproductility-not above 4;
5. Resolution: 0.1 °C;
6. Precision: 0.5%;
7. Heating rate: agree with standard GB/T261;
8. Ignition device: electric ignitor or natural gas flame;
9. Ambient temperature: between 10 and 40 °C;
10. Relative humidity: ≤8°C;
11. Total Consumption: not higher than 300 W.
For more information, please feel free to contact me. I will reponse to you as soon as possible.