Fuel flow meter PORT-1/base, Digital Fuel Meter - PORT-1/Base

Fuel flow meter «PORT-1/base», Digital Fuel Meter (external device of indication LCD - monitor "PORT", Wired )

Consists from:

• GFC "PORT-1" (the gauge of fuel consumption);
• Controller of fuel flow meter "PORT-1";
• The assembly complete set (food wires, hoses, nuts, unions)

GFC "PORT-1" – the electromechanical device – is built in fuel system of a diesel engine, forms and transmits a signal defined by fuel consumption in the Controller of fuel flow meter "PORT-1".

Controller of fuel flow meter "PORT-1" – the electronic device – which is established in a car cabin, vessel cabin etc., accepts and processes a signal from the fuel consumption gage and as stores the received information.

Each gage of fuel consumption is calibrated, the given calibrations (checking) are brought in the controller program, therefore to each gage of fuel consumption there corresponds the unique controller.

The information kept in the controller:

• The general (total, saved up for all time) fuel consumption, liter;
• Time (total) engine works, hour – minutes;
• Current fuel consumption, liter/hour (at the connected monitor in an operating time).

Monitor "PORT" – the electronic device, serves for a conclusion of the information and management of the controller (zeroing of the data saved up by the controller, input of correction factor). Monitor connection to the controller is carried out by means of a cable.

ATTENTION!

• The monitor only displays the information.
• Data is stored in memory of the controller.

The information displayed on the screen of the monitor, either is remembered by the user, or registers in a paper for its further analysis.

Monitor "PORT" allows to read out the information from any controller, therefore the customer can include in the order some systems of the account (the fuel consumption gage + the controller) and one monitor.

Monitors are made in two versions:

• Monitor "PORT-1/Management&Viewing":
  The monitor with management function – allows to look through the data and to operate the controller (to null the saved up data to change correction factor);
• Monitor "PORT-1/Viewing":
  The monitor with viewing function – allows to look through the data only

APPOINTMENT

Systems of the account of a series "PORT-1" are intended for measurement of the valid expense diesel that in the range from 1,5 to 100 Liter/hour and can be established practically on all kinds diesel techniques. Possibility of installation of a flow meter is defined by technical parameters of a diesel engine: Max. value of consumption of fuel – to 100 Liter/hour and a design of fuel system of a diesel engine – is necessary presence the fuel pump of a high pressure.

FUNCTIONALITY

Realization of the account and control of fuel consumption by diesel cars, for the purpose of prevention not-proved the over-expenditure and no-purpose use of diesel fuel.

The basic consumers of production are the agriculture enterprises, Transport companies, a railway transportation, a sailing charter, etc.

Systems of the account of a series "PORT-1" are developed and made in several versions, technically and functionally:

• "PORT-1/base" - Data read-out visually - monitor "PORT"
• "PORT-1/PC" - Data read-out through a cable-adapter in the computer (the program "Generator of reports")
• "PORT-1/R" - Data read-out on a radio channel in the computer (the program "Generator of reports")
• "PORT-1/GPS" – Data (Fuel consumption, GPS-data) read-out through a cable-adapter in the computer (the program "Generator of reports")
• "PORT-1/R/GPS" - Data (Fuel consumption, GPS-data) read-out on a radio channel in the computer (the program "Generator of reports")
• "PORT-1/GSM/GPS" - Data (Fuel consumption, GPS-data) read-out by means of cellular communication on server "PORT" connected to a network the Internet, on-line and then in the local computer (the program "Generator of reports")
• "PORT-1/GSM/GPS/GLONASS " - Data (Fuel consumption, GPS/GLONASS-data) read-out by means of cellular communication on server "PORT" connected to a network the Internet, on-line and then in the local computer (the program "Generator of reports")

Account systems allow to receive a detailed picture about current fuel consumption, about fuel consumption for the chosen time interval (hour, day, change, month, …), about full fuel consumption of techniques, about a movement route to transfer the data on a wireless communication, including on-line, to the terminal (computer) of the consumer and some other functions.

COMPLETENESS
All versions flow meters "PORT-1" are completed with the complete set of assembly parts (food wires, hoses, nuts, unions) for installation of the gage of fuel consumption on a diesel engine, the complete set of cables of the necessary length, the corresponding software, full engineering specifications to installation with connection schemes on various technicians, adjustment and operation.

PROTECTION
In all versions of systems "PORT-1" it is provided both mechanical, and electronic protection against unapproved intervention in work.