Product Features:
Flame Photometer is an ideal instrument for the determination of sodium, Potassium, Calcium and Lithium.
Business Terms:
Contact Supplier
Flame Photometer is an ideal instrument for the determination of sodium, Potassium, Calcium and Lithium.
Microprocessor Flame Photometer, Model-1382 is an ideal instrument for the determination of sodium, Potassium, Calcium and Lithium. It uses the latest Microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. It has soft touch membrane key for ease of operations. the solution is aspirated through an automiser, Air sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results are displayed on the digital display. The System has 5-Point calibration facility and no linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed.
Model No.: FA13XB
Features: Special design for tyre crane,bridge testing vehicle etc large mechanical equipments.
Model No.:
Features: common rail injector tools common rail tools common rail pump and injector repairing tools
dual-use fastening screw.
Model No.: SDS1304CFL
Features: DSO oscilloscope:
Bandwidth: 300MHz
Display: 7'' screen
Channel: 4CH
Real time sampling rate: 2GSa/s
Model No.: FA13XA
Features: Special design for plant, electric power, harbor, factories and mines, wind generator etc large mechanical equipments.
Model No.: FA13x
Features: Anemometer
1. For plant, harbor, factories and mines, wind generator, large mechanical equipments.
2. Icefree type
3. IP65
Model No.: FA101A
Features: wind speed sensor
1. anemoemter+digital display panel
2. two output signals for relay control
3. material: ABS+PC
Model No.: HWC-101
Features: Model No.:HWC-101
~Cycle constant temperature.
~For bitumen tester.
~Long service life.
~Low noise.
Model No.: VMS-2010E
Features: Speed Measurement Equipment
1.Certification:ISO9001:2008
2.Travel:200X100X150mm
3.Japan SONY CCD
4.Resolution:0.0005mm
Model No.: YF-1510F
Features: Stability Testing Instrument
1.Japan SONY color CCD
2.Travel:150X100X150mm
3.Resolution:0.0005mm
4.Accuracy:0.003mm
Model No.: YF-2515
Features: Electronic Measuring Instruments
1.Certification:ISO9001:2008
2.Resolution:0.0005mm
3.Travel:250X150X150mm
4.U.S. TEO CCD
Model No.: YF-1510F
Features: Three-dimensional Images System
1.Japan SONY color CCD
2.Travel:150X100X150mm
3.Resolution:0.0005mm
4.Accuracy:0.003mm
Model No.: YF-2515
Features: Test and Measurement Equipment
1.Certification:ISO9001:2008
2.Resolution:0.0005mm
3.Travel:250X150X150mm
4.U.S. TEO CCD