Field RTD Input Temperature Transmitter with Galvanic isolation MS190 - MS190

MS190 Temperature Transmitter

Detail Product Information

• Universal PC programmable (PCP)
• Two-wire technology, analog output 4 to 20 mA
• Digital display (LED,LCD)
• Operation, visualisation and maintenance with PC
• Highly accurate in entire operating temperature range
• Configuration during measurement using PC or via the HART communication
• Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
• Ex-Certification
• Galvanic isolation
• Output simulation

Primary Technical Characteristics

Programmable .............................Use PC or the hand operator

Measuring range .........................Set via PC with special interface or by the hand operator

Input type.................................... RTD, TC, R or Millvolt signal

Convert accuracy .......................≤0.1%FS

Cold junction accuracy............... ±1°C(TC)

Output......................................... 4~20mA/20~4mA Electrical isolation output HART Protocol output

Max-load.................................... (V -13V)/0.025A(output Current)

Limit current ...............................≤25mA

Response time ............................1s

Isolated voltage ...........................1500V AC (input/output)

Alarm signal................................. Programmable

Below the measuring range Output drops to 3.8mA

Higher than the measuring range Output rises to 20. 5mA

Sensor faults Setting as≤3.6mA or ≥21.0mA

Power supply ..............................13~30V DC

Temperature drift ........................0.01% FS / 1°C

Long-term stability ......................≤0.1°C per year or 0.05% per year

Protection level............................IP67(aluminum alloy),IP65(plastic)

Digital display............................. LED,LCD

Display voltage-drop ..................3V(LED),0.5V(LCD)

Display accuracy ........................0.1%

Ambient..................................... -40~+85°C

Explosion-proof class................. Exdii CT6 EX iaii CT6

Field of application

PC programmable (PCP) Field-mounted temperature transmitter for converting various input signals into a standard 4 to 20 mA analog output signal

Input:

Resistance thermometer (RTD)

Thermocouple (TC)

Resistance transmitter (Ohm)

Voltage transmitter (mV)

HART-protocol for front end unit or panel unit operation using the hand operating module (MS275, MS375,PDA N800,PDA S900) or PC

Every part is coming from Moshu Group! From professional factory!