Embossing Roller Balancing Machine
Large application&measure range
High initial unbalance permitted
High precision&efficiency
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets with no discount
Supply Ability: 500 Set/Sets per Month negotiation
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Packed in Fumigated Wood Box
Delivery Detail: we will send it within 15 days after confirming the order
Embossing Roller Balancing Machine: PHQ-2000 Belt Driven Balancing Machine
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors,embossing roller. textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate.
| Specifications | Parameters |
| Max Mass of Workpiece (kg) | 2000 |
| Max Diameter of Workpiece (mm) | 1800 |
| Distance between Two Support Bearings (mm) | 180--1700 |
| Journal Diameter Scope of Workpiece (mm) | 40~240 |
| Diameter Scope of Driving Belt (mm) | 40~600 |
| Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) | -2000(Variable-frequency and Stepless Speed regulating) |
| Motor Power (kw) | 5.5variable-frequency |
| Min Achievable Residual Unbalance Amount (emar) | 0.5g· mm/kg |
Model No.: IDEA-ET System
Features: 1.Full-body NDT testing system of seamless and Electrical Resistance Welded (ERW) tube ends with stationary probes
2. NDT test
Model No.: IDEA-ET-UT1
Features: 1 High-speed full body ndt tester of seamless and Electrical Resistance Welded (ERW) tubes with rotating probes
2.ET&UT&NDT
Model No.:
Features: 1. made of aluminium. For measuring wet film.
2. T/T payment
3. shipment: 20 days after confirmation
Model No.: GT-C13A
Features: Abrasion and Pilling Machine
1.LCD Counter display
2.Models : 4. 6. 8 . 9Heads
Model No.: DGD-SD5
Features: Cable fault locator
Good quality and easy to use
Discharge the fault point under the impulse of high voltage(FZ,GZF,CXZ etc )
Model No.: GT-C34
Features: laboratory testing equipment
1.Temperature resolution:1 degree
2.Ignition time:15s
3.Dimensions:450x310x510mm LxWxH
Model No.: HZ-7001A
Features: 1.Rubber dynamic scanning rheometer
2.Torque accuracy:0.3%
3.Torque resolution:1/500000
4.ISO ASTM...
5.3 years warranty
Model No.: HZ-2001B
Features: salt spray test chamber
1.high quality
2. Inside box size(cm):60x45x40
3.standard:ASTM.B117-97
4,low price
Model No.: GZF-KVA/KV G/Y
Features: power frequency high voltage test equipment
Good quality
Model No.: HP-50
Features: the machine adopts rechargeable batteries ,small volume ,light weight, precise structure,easy to carry and use.
Model No.: TME-45,TME-180,TME-1.8
Features: by fixture test other products, such as tighten of bottle lid, destruction of small parts for test,quality control of plastic.
Model No.: HP-10
Features: the machine adopts rechargeable batteries ,small volume ,light weight, precise structure,easy to carry and use.