Electronic Tensile Testing Machine - CXWDW

Micro-computer control electronic universal material testing machine

1. Usage
The Servo electronic universal testing machine UTM is mainly applicable for many kinds of test such as tensile, compression, bending, and so on. It also could do the test of creep deformation, duration, stress relaxation, low cycle test and tensile test under low temperature or high with related accessories.

2. Range
It can do the test of crankle, pure torsion, stop log bending and press stable by fitting multi-functional material dynamics experimentally teaching facility; It can do the test of tensile, gripping, tearing, burst, pierce to the geotechnical composite material according to SL/235-1999 "Geotechnical Composite Material Test Rules"; Tensile, compression, torsion test of biomechanics; Labor security supplies security test; Mechanical property test to material of wood and hard board according to test method of GB/T17657 "Hard Board Veneer Hard Board Physicochemical Performance Test Method" and GB/T1935~1943 wood material test method.

3. Test force
(1) Max. Test force: 5KN, 10KN, 20KN, 30KN, 50KN, 100KN
(2) Valid measure range: 0.2%~100%F. S.
(3) Resolution: 1/60000, 1/120000, 1/240000, 1/300000, 1/400000, 1/500000 (self setting according to the test requirement)
(4) Measuring relative error: ± 0.5%

4. Test speed
(1) Adjusting range: 0.005~500mm/min (stepless adjustment)
(2) Accuracy: ± 0.5%
(3) Control range even test force speed rate and even deformation rate: 0.01%-10%F. S.
(4) Control error even test force speed rate and even deformation rate: ± 0.5%
(5) Control range of invariable test force and invariable deferment: 0.5%~100%F. S.
(6) Control error of invariable test force and invariable deferment: ± 1% of setting point when less than 10%F. S.; ± 0.1% of setting point when high than 10%F. S.

5. Displacement
(1) Measuring range: 0~999mm
(2) Resolution: 0.001mm
(3) Measuring relative error: ± 0.5%

6. Deformation
(1) Gauge length: 50mm (according to the requirement of customer)
(2) Output range: 0-5mm (according to the requirement of customer)
(3) Valid measuring range: 0.2%~100%F. S.
(4) Resolution: 1/60000, 1/120000, 1/240000 (self setting according to the test requirement)
(5) Measuring relative error: ± 0.5%

7. Security protection
Position limiter; Emergency switch; The control system can protect automatically once over-load, over-currency, over-voltage, over-temperature

8. Computer system and software package
(1) All the operating controlled by the computer
(2) User can select get the information by select different test program, setting the test program, curve type, unit, precision, display information before test.
(3) Get the force and deformation value on the curve with mouse.
(4) You can select all the curves and change during the test.
(5) You can acquire the data real-time, make the curve, enlarge and reduce the curve locally and print it.
(6) You can superposition and compare the curves of same group.
(7) You can save and read the test result at any time, re-analysis the curve including re-calculate and re-appear.
(8) It is easy for user to output the original data and result to EXCEL and print the report.
(9) It can set the control parameters itself and run automatically.