Electronic Ballast Analyzer (UI3000) - UI3000

Electronic Ballast Analyzer Specification:
• The compositive tester uses 12digit high-speed A/D converter. The speed reaches 10MHz when sampling. It can test the wave shape of a single high frequency wave. Also, it provide reliable methods for the researchers to develop the ballast working principle and analysis reliably. It meets the ballast and fluorescent lamp as well as the electrical capability testing requirements of IEC60929, IEC60969, IEC61000-3-2.
• High Frequency Waves Visible.
• Measure parameters:
1) Input: Vrms, lrms, W, PF, Hz, phase angle, total harmonic and 0~39th harmonic components
2) Output: Lamp voltage, lamp current, filament current, guided cathodic current, lamp power, crest factor and oscillatory frequency, single high frequency pulse analysis
• Startup: Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time
• Pre-heat energy test: test pre-heat energy and filament pre-heat time, test parameter changing curves of filament voltage, filament current, and filament power from 0 to 5 seconds after startup
• Input accuracy: ±(0.1% reading+0.1% range+1 digit)
• Output accuracy: ±(1% reading+1% range+2 digit)
• 8 windows for displaying input and output parameters simultaneously, convenient for comparison and analysis
• Frequency response up to 1MHz Irms, content to every EB
• Analysis symmetry of lamp current envelope
• Super high speed A/D with sampling rate up to 10MHz, dynamically analyzing single high frequency pulse
• Input and output parameters tested simultaneously within 1 second
• Portable style with single board micro-computer suitable for R&D and manufacturing spot, parameters and curves can be printed
• Special program running under Windows 98/2000/XP/Vista provided for communication with PC, English version available