Electromagnetic flow meter - KY8201

This E8201 Electromagnetic flow meter use E8200 converter and MF01 sensor together which has concluded all the advantages of the two parts.

E8200 model converter

E8200 model converter is designed on the basis of micro-procession technology which has all the features and advantages of intelligent instruments, such as simple structure, stable and reliable performance and high price/performance ratio.

Technical data

1 Flow-rate display: two-line Chinese liquid crystal display which directly display various flow data.

2 Parameter set: through the buttons on the panel or the upper level computer, the following parameters can be set: flow display unit, output signal range, impulsion equivalent and zero adjustment, damping time, and so on.

3 output signal

4 current output: 4-20 mA

5 frequency output: active impulse: high level

Low level load current:

Passive impulse: high level=external power source1 V

( external power source voltage should be ≤30V)

Low level load current

The max output frequency value is 2kHz

6 communication port: RS485

7 Protection class: IP65

8 working power: DC24V±10% or AC220V±10%

9 installation structure: can be assembled with MF series sensor to form EMF8200-C series integrated electromagnetic flow meter; or connected with the MF with signal cable to form EMF8200-S series separate type electromagnetic flow meter. E8200 separate type converter can be fixed on the wall or in the support.

Sensor series

MF01 model flange type electromagnetic flow mater sensor

1 The shell of MF01 model sensor is welded from carbon steel , only the electrode and lining material is connected with the media.

2 MF01 has 6 electrode materials and 4 lining materials for option to meet different requirements of different media.

3 FEP can be used in negative pressure pipeline.

4 MF01 is matched with converter to form integrated electromagnetic flow meter of separate type electromagnetic flow meter.

Technical Data

1 Application range: including all conductive liquid such as fresh water, soft drinks and various corrosive liquid and solid- liquid two-phase fluid (slurry, pulp, etc)

2 Diameter : DN6-2000 (mm)

3 Nominal pressure : 0.6-40. MPa

4 Electrode material: stainless steel 316L , Hayne alloy C , Hayne alloy B, Titanium, tantalum and Tungsten Carbide.

5 Lining material: FEP, Ne, Po, PTFE.

6 Media temperature: -40-180

7Shell material: carbon steel (stainless steel can also be used upon the requirements of the customer)

8 Protection class: IP65, IP67, Ip68

9 Connecting flange: GB9119 (can be directly connected with pipeline flange HG20593-1997

10 Working power: from converter

MF01a model sensor

MF01a model sensor is a product specially designed for big-diameter sewage pipeline. It has scraper type electrode structure, which is easy for customer to remove the silt covered on the surface of the electrode online so as to ensure normal operation of the product.

Diameter: DN150-2000.

MF01(Ex) anti-explosive sensor

Diameter: DN10-300 (mm)

Anti-explosive grade: Exd(ib)ibqIIBT5

It can be matched with E8300 model converter.