Electromagnetic Flow Meter

Electromagnetic Flow Meter, produced by Shanghai Anjun, can be widely used to measure the volumetric flow rate of the conductive fluid and slurry in the enclosed pipe such as water, sewage, all kinds of acid & alkali & salt solution, slurry, ore slurry, pulp and so on.

Technical Features:

• Not affected by the change of the fluid condition such as density, viscosity, temperature, pressure and conductivity, and the signal output of inductive voltage is linear to average velocity, therefore it has a high accuracy of measurement.
• No obstacle parts in the meter tube so that no extra pressure loss; no movable parts, so meter has long service life.
• Short straight pipe required, only 5D for upstream and 3D for downstream due to inductive voltage signal which is the average value in the cross-section of the pipe.
• Only liner and electrode contact to the fluids, choose proper material of liner and electrode to prevent it from corrosion to ensure meter long operation life.
• MCU and SMT technology used in converter to make it has high performance, high accuracy, low power consumption, stable zero point, easy parameter setting, dot-matrix display for total and instantaneous flowrate, velocity and percentage of flowrate.
• Two-direction measurement for forward and reverse.

Technical Specifications:

• Size: DN 10 ~ DN 3200
• Medium: Conductive liquid, slurry
• Medium Temperature: E grade∠60^oC, H grade∠180^oC
• Conductivity: ≥ 5 μS/cm
• Accuracy: ±0.3%, ±0.5%
• Repeatability: ±0.1%, ±0.17%
• Rated Pressure: 0.25, 0.6, 1.0, 1.6, 4.0MPa (or specified by customer)
• Display: Instantaneous flowrate, total flow, velocity, flowrate percentage with back light
• Signal Output: 4~20mA current output, pulse output, RS-485, Hart, Profibus-DP
• Power Supply: 220VAC, 24VDC
• Converter Type: Compact, remote
• Protection Grade: IP67/ IP68
• Explosion Proof: Ex deibmb IIC T3~6
• Velocity: 0.3 ~ 12m/s( 0.1 ~ 15m/s as required)
• Liner: Chloroprene Gum (DN50 ~ DN3200) / Polyurethane (DN25 ~ DN500) / F4 (PTFE) (DN25 ~ DN1600) / F46 (FEP) (DN10~DN200) / PFA (DN10~300)
• Flowing Direction: Forward, Reverse
• Electrode Material: 316L, Pt, Ta, Ti, HB, HC, WC
• Electrode Type: Standard fixed type, blade type
• Electrode Number: 4 ~ 6 pcs
• Flange Material: SS / CS
• Alarm (normal open): Empty, excitation, upper / lower limit
• Ambient: Temperature: -25 ~ +60^oC, Humidity: 5 ~ 90%
• Communication: RS-485 / Hart / Profibus-DP