Wire strands universal testing machine
1. Computer control
2. 4 upright posts
3. Hard chromeplated
4. Fracture in the mi
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10 Unit/Units per Week
Payment Terms: L/C,T/T,negotiable
Contact SupplierPackaging Detail: Firm wooden case with polyfoam inside
Delivery Detail: 20 days after order confirmed
WAW Microcomputer Controlled Electro-hydraulic Servo Steel Stranded Wire Universal Testing Machine
Application: Steel stranded wire universal testing machine is to perform tension and other tests for wire strands.
Technical specification:
Model | WAW-1000 | WAW-600 |
Load Capacity | 1000KN | 600KN |
Software control | PC controlled electro-hydraulic servo software | |
Precision | ±1% | ±1% |
Max. distance between tension heads(mm) | 1000 | |
Piston stroke(mm) | 250 | |
Clearance for Tension Test(mm) | 50-850 | 50-800 |
Clearance for Compression Test (mm) | 700 | 640 |
Clearance between columns(mm) | 700 | 700 |
Max. span between rollers ( adjustable)(mm) | 400 | |
Working voltage | 380V or 220V | |
Power of oil pump motor | 2.0KW | |
Main frame dimension(cm) | 100x70x275 | |
Controller cabinet dimension(cm) | 104x65x86 | |
Weight(kg) |
12. Personal computer complete with 17” monitor and printer
13. Software for checks, machine feedback and data processing
Features:
1. 4 upright columns and 2 screw poles to ensure long time application, hard chromeplated, noncorrosion. Easy installation of hydraulic jaw, tension fracture position in the middle of specimen.
2.Underneath oil cylinder
3. Multifunctional software is capable of performing measurement, control, calculation and datasaving. Data and curves can be re-analyzed, part amplified and data re-edition, with test conditions(specimen and measurement) are programmable, all the mechanical properties are obtained automatically, whole test reports and curves are printable.
4.High precision sensor help to obtain reliable test results. Large capacity of keeping record of data as well as indication of kinds of curves.
5. With high quality parts, imported high quality motor, thick steel columns, plates and beam(300kg heavier than similar products from other manufactures) ensures no distortion for tensile test, steady and no viberation in steel tests.
6. RS232 Port is avaliable to connect the UTM to computer, to acquire and indicate data on computer
Accessories including:
Main frame; control console; controller and sensor; grips in three sets; bend support saddle; spheric compression riser plate; lower compression platen; top board; ground screw and nut; inner hexagon spanner; wire power cord; O type gasket; cruciform screw driver; double offset ring spanner; full sets of other accessories.