1. Cost-performanced pressure transducer
2. Pressure range: 0-350KPa to 70MPa
3. High level output
4. Wide application
Port: Shenzhen
Minimum Order Quantity: 10 Piece/Pieces
Supply Ability: 2000 Piece/Pieces per Month
Payment Terms: T/T,Western Union
Contact Supplier
Packaging Detail: Bulk package
Delivery Detail: 2-4 weeks
The EP series of pressure transducer is economical and satisfied numerous applications where pressure transducer performance and reliability are desired, but where budgets are limited. Linearity is 0.5% or 1%FS available.
The EP series is constructed with stainless steel diaphragm with no O-ring, no organics exposed to the pressure media. This product is particularly suitable for high volumes OEM customers.
General Specification at 25°C | |
| Pressure range: | 0 to 350KPa to 100MPa |
| Accuracy: | ±0.5% or 1% of FS Span (combined linearity, hysteresis and repeatability) |
| Media compatibility: | 17-4 PH |
| Pressure cycles: | >106full pressure cycles |
| Pressure overland: | 2X rated pressure |
| Burst pressure: | 5X or 20000 PSI whichever is less |
| Long term stability: | ±0.25% FS Span (Typical) |
Electrical: | |
| Supply voltage: | 5VDC or 10-30VDC |
| Outputs: | 0.5-4.5VDC, ratio metric, 1-5VDC, fixed or 4-20mA, two wire |
| Zero offset: | ±1% of FS |
| Span tolerance: | ±1% of FS Span |
Environmental Performance | |
| Operating temperature range: | -20 to 85°C (or consult) |
| Compensated temperature range: | 0 to 55°C |
| Zero TC:: | ±1%FS @ 25°C |
| Span TC:: | ±1%FS @ 25°C |
| Shock: | 50g, 11msec, 1/2 sine |
| Vibration: | ±20g |
| Rating: | IP65 |
Model No.: UPX30
Features: Based on piezoresistive silicon technology
MEMS technology
Stainless steel construction
Intergrated, high static pressure
Model No.: UPC5
Features: 1.High measuring accuracy, high stability, high reliability
2.Good ability of anti-corrosive, anti-attrition, and anti-impact
Model No.: SE52H
Features: HART Transmitter Module(pressure sensor)
1)Popular sensors acceptable
2)Acceptability 1.5mV-4.8V signal input
Model No.: SMP838
Features: *flush Diaphragm Pressure Transmitter
*range:0~0.05bar and 0~20bar
*accuracy: 0.25%F.S
*output :4~20mA
Model No.: SMP121
Features: *pressure gauge
*suitable for non-aggressive and dry gases
*super anti-interference ability
*excellent performance
Model No.: UPX7-b
Features: based on strain gauge technology
ranges from 0~10bar to 0~2000bar
high accuracy 0.1%FS, O-ring or welded sealing, low cost
Model No.: Capacitance pressure sensor
Features: Capacitance pressure sensor
Measuring range: 0~1.6Kpa; 0~6Kpa; 0~40Kpa; 0~200Kpa; 0~1000Kpa; 0~2Mpa; 0~10Mpa, 0~25Mpa
Model No.: UPX18
Features: 1. Measuring range:0~0.07...10bar;
2. TO8 packing, enable for PCB installation;
3. Low cost, small size.
Model No.: CTL series pressure transmitter
Features: CTL series pressure transmitte
Communication output standard serial bi-directional communication interface
Model No.: UPX6-a
Features: UPX6-a pressure sensor with range of -1~0bar, 0~1bar...60bar, accuracy 0.1%FS or 0.25%FS, high quality and good reliability
Model No.: UPX6-c
Features: diameter: 15.8mm
range -1~0bar, 0~0.2bar, 0~0.5bar...0~600bar, accuray 0.25%FS or 0.1%FS,
quick delivery in 5 days
Model No.: UPC6
Features: Fully sealed structure & full stainless steel construction
Submerible type;
Range: 0~1m..200mH2O
Acurcy: 0.1%, 0.25%, 0.5%