The ST-05B Laser Diameter Instrument It is special suitable for real-time measurement of the production field
Port: Guangzhou
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 100 Unit/Units per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
| ST-05B (Table) Laser Diameter Measuring Instrument | |||
| Features: Laser two-dimensional scanning: Two bunches of lasers to do outer diameter measurement of non-contact ,non-damage from the different angle, it can effectively eliminate error caused by work vibration; DSP data processing technique: The sampling speed is quick ,precision is high and the performance is stable; The reaction control integration module with PID constitute the online outer diameter closed loop observation and control system (e.g.: diameter of the object measured is slight big or small, transmission rate is big or small), which can change the transmission rate to control the outer diameter be tested through adjusting the power supply with PID. Its easy to operate, user can setup a boundary numerical value, main engine will give an alarm automatically while the test result exceeds the set value. It processes R485 communication interface, can be connected with PC machine and PLC and then composed into long-distance collection and distribution supervisory system, The transmission length may reach 200m | |||
| Introduction: | |||
| The ST-05B Laser Diameter Instrument is a high accuracy one without contacting designed on the basis of the laser scan measuring principle. The 2-dimension measuring mode is applied to the instrument, and the 2-way laser beam is in the positive cross design in the measuring field, thus effectively eliminating testing errors caused by work piece shocks. It is special suitable for real-time measurement of the production field, and widely used in the test of round wire materials such as communication cables, optical cables, co-axial cables and power cables, and the test of various kinds of other round work piece diameters. | |||
| Technology Parameter: | |||
| Measure Range(mm) | 0.2~30 | ||
| Measure Precision(um) | ±2.0 | ||
| Sensitivity(um) | 1.0 | ||
| Communication Interface | RS485 | ||
| Feedback Output | DC-2.5V~2.5V | ||
| Relative Humidity | no dew than 85% | ||
| Environment Temperature | 4~40 | ||
| Power Consumption(W) | 50 | ||
| Scanning speed(m/s) | 50 | ||
| Packing Specification(mm) | Main Engine:441×170×546 | ||
| Product Allocation | Laser Diameter Measuring Instrument:1 unit; Calibrating stand:1 set | ||
Model No.: TG-047
Features: thread plug, thread ring, plain gauges measuring pins, gauge handles, taper gauge
Model No.: TM-8812
Features: Provides wide measurement range of 1. 00 ~ 200. 00mm, high resolution, converts mm to in & vice versa, match 11 different probes
Model No.: CM-260206
Features: Auto Meter / Racing Gauge 52mm digital 2 in 1 Fuel Pressure with Volt
Model No.:
Features: Wet film thickness gauge is used for accurate measurement of a variety of fabrics, leather and plastic, carpets, paper products.
Model No.:
Features: Electronic digital micrometer, electronic digital micrometer, micrometer, This instrument applies to mechanical measurement.
Model No.:
Features: Electronic digital micrometer, electronic digital micrometer, micrometer, This instrument applies to mechanical measurement.
Model No.:
Features: 1.Portable Digital Thickness Gauge
2.The instrument is simple, intuitive, reading
3.Easy to operate, visualized in reading
Model No.: S-UG63
Features: Handheld Ultrasonic Thickness Gauge with high quality and good design
Measure the result quickly
Low battery indication
Model No.: WT102
Features: Continuous Dial Thickness Gauge
1.Cancontinuous Dial Thickness Gauge
2.High technical making
3.Precise and durable
Model No.: CM-260212
Features: Auto Meter / Racing Gauge 52mm digital 2 in 1 Boost / Turbo with Air Fuel Ratio
Model No.: WST-3D
Features: digital readout for lathe
1.multifunctional type DRO
2.2 OR 3 axis optional
3.beautiful design
4.digital readout for lathe
Model No.: GGS-40200
Features: 1. Accurately measures bracelets or other wrist jewelry
2. Adjustable sizes marked from 5" to 9" in 1/4" increments