EEC-35++ Multi-purppose Eddy Current Tester - EEC-35++

--Frequency range from 64Hz to 4MHz

--4 independently-selectable channel

--Signal mixing capabilities

--Adjustable gain from 0dB to 90dB in 0.5dB steps.

--360 degrees phase shift can be varied in steps of 1 degree,the impedance plane can be rotated during modification for ease of operation

--Colored real-time display of x-y impedance plane and/or strip chart signals.

--A-scan and C-scan displays

--Display 3-simultaous x-y signals 2 built-in strip chart signals

--Delay erase display mode

--Independent vertical to horizontal display scaling ratio adjustable from 0.1 to 10

--Viewing area (Enlarge location area signal)

--All instrument settings are shown on the display.

--Digital filters

--Audio, visual and logic output alarms

--Fast electronic balancing

--Special alarm areas adjustable from 1 to 8

--Signal phase and amplitude auto measurement functions

--Adjustable sampling rate.

--Alarm area is provided for each display window of impedance plane

--Four connectors are provided for differential, absolute and reflection type probes

--Alarm area size and positioning are independently adjustable. either inside or outside the gated area

--Phase/amplitude alarm area: The amplitude of alarm area is a function versus its phase, so defects in different layer which have the same amplitude level can be distinguished by their phases.

--Alarm can be set to trigger.

-- It can be used to test conductive materials and measure the coating thickness. EDDYSUN own the advanced mixing algorithms, providing the cleanest, most effective signal mixes.

-- The audio, visual and logic output alarms can determined flaw conditions. Real-time C-scan display helps you to differentiate between multiple layers and determine flaw orientation.