Digtal target flow meter/Differential pressure flow meter - Digtal target flow meter

Introduction

It's a simple structure, easy install and maintenance, anti-clogging flow meter, mainly using for measuring application with high viscosity and low Reynolds number, as well as application with certain amount of solid particles. Apart from above, target type flow meter can also measure normal liquid, gas and steam.

Technical parameter

Structure

Target type flow meter is composing form measuring pipeline, force taking target, sensor (force sensor, pressure sensor and temperature sensor), transition component (changes according to temperature and pressure), and totalizer display & output component.

Features
1.Force sensor is a fixed part, simple and stable structure.
2.Wide measuring range: normal fluid application used in industries, including liquid, gas and steam; large range of bore (greater than DN15); suitable for many working environment (pressure, temperature). It has similar working range like traditional orifice flow meter.
3.High accuracy up to 0.2%.
4.Wide measuring ratio: 4:1 ~ 15:1
5.Solved difficult measuring situation, i.e. fluid with dust and small particles: crude oil, sewage, high-temperature residue, liquid caustic soda, asphalt.
6.It can used for small bore size pipeline (DN15 ~ DN50), low Reynolds number (ReD=103 ~ 5X103) liquid, suitable for those situation which standard throttling device doesn’t work.
7.Measuring high-parameter application, pressure up to 42MPa, temperature up to 500°C.
8.Low pressure loss, half of standard orifice flow meter.
9.Anti-interference of baffles on upstream. Straight pipe required for upstream only 5~10D.
10.Calibration can be done with weight hanging rather than actual flow. Easy for self-calibration.